Baracoda Bluetooth Headset manual Batch mode settings

Data Capture

for Workforce

in Motion

The following table shows the Other Settings buttons that you can set:

Button	Functionality
Product	Access product settings (see below)
Bluetooth	Access Bluetooth connection settings (see below)
Symbology	Access types of barcodes settings (see below)

The table below shows the actions you can take with the buttons:

Button	Functionality
Cancel	Close window with no changes.
Save	Store and send the new parameters to the barcode reader.
Default Settings	Restore the factory settings. The barcode reader (flash) memory is erased and
	the factory default parameters are restored. Check the device manual for
	details.
Upgrade	Ugrade the reader’s firmware. Please check Chapter 16 for details.

8.1.Batch mode settings

Please note that the batch mode is supported on D-Fly with P/N value “B401202xx” (firmware v1.54 and newer).

The Batch mode configuration displays three buttons and give the choice between: 1. Upload barcodes to a file

oAlways upload to the same file, overwriting the previous content (“Overwrite last upload file”) o Append data to last upload file (default)

o Generate a different file name for every upload (“Add timestamp to file name”)

2.Upload barcodes to an application window

(for more information see the paragraph “Uploading data stored in batch mode”)

Button	Functionality
Browse	Choose a file name and path to store the barcodes
OK	Close Batch configuration window without saving any modifications
Cancel	Save the modifications and close Batch configuration window

BaracodaManager for PC – User Guide v3.39 - 27 -