Baracoda Bluetooth Headset manual Baracoda DualRunners settings

Data Capture

for Workforce

in Motion

12.Baracoda DualRunners settings

The Settings window displays nine buttons and six groups:

-General information

-Current Operating Mode information

-Shutdown Timer information

-Battery

-Data capture mode

-Other Settings

The following two tables show the General information fields:

Field	Functionality
Application	Version of embedded Baracoda software
Name	Bluetooth name of the barcode reader
RFID	Version of the RFID engine

The table below shows the user the Operating Mode options that they can set:

Field	Functionality
Batch	Set the batch mode: scanned barcodes are stored in non-volatile memory and
	can be uploaded to the application later (click on “Batch config” for more
	advanced settings)
Real time	Set the Real-time mode: scanned barcodes are transmitted to the application
	immediately when the Bluetooth radio connection is active. If the connection
	is not established the barcodes are lost, unless “Enable Buffering” is set (see
	below).
Master	Set the Master mode: The barcode reader automatically creates connection
	to the specified Host device when the user scans a barcode. Then the reader
	works as in real time mode.
Host addr.	For use in Master mode : Set, in the address field, the Bluetooth address of
	the host device the reader has to connect to.

BaracodaManager for PC – User Guide v3.39 - 46 -