Baracoda Bluetooth Headset manual IdBlue settings

Data Capture

for Workforce

in Motion

16.IdBlue settings

The Settings window displays eight buttons and five groups:

-General information

-Disconnected Mode information

-Shutdown Timer information

-RF Protocol

-Battery

-Other Settings

The following two tables show the General information fields:

Field	Functionality
Decoder	Version of embedded Baracoda software
Name	Bluetooth name of the barcode reader
The table below shows the user the Disconnected Mode options that they can set:
Field	Functionality
Batch	Set the batch mode: tags read when the reader is disconnected are stored in
	non-volatile memory and can be uploaded to the application later (click on
	“Batch config” for more advanced settings)
No batch	Set the no batch mode: tags read when the reader is disconnected are lost.
The following table shows the Shutdown Timer fields that you can set:
Field	Functionality
Device shutdown	Set the delay (in minutes) after which the barcode reader switches off
	without any activity.
RFID shutdown	Set the delay (in seconds) that the reader allocates for the user to read an
	RFID tag after the reader button has been pressed.
The following table shows the RF Protocol field:
Field	Functionality
None	Disable the engine reading RFID tags.
ISO 156693	Only ISO tags will be read.
Tag-IT HF	Only IT HF tags will be read.

BaracodaManager for PC – User Guide v3.39 - 64 -