Baracoda Bluetooth Headset manual Uploading data stored in batch mode

Page 67

Data Capture

for Workforce

in Motion

17.Uploading data stored in batch mode

This feature is supported by all readers with the exception of the BL1000, BCM2604 and some D-Fly (with firmware v1.54 and newer) reader models. Select a connected reader in the “My Paired Devices” list and click the Upload button to upload the stored barcodes.

Users can set the batch settings to one of the following options:

-Upload data to file (default option)

oAlways upload to the same file, overwriting the previous content (“Overwrite last upload file”) o Append data to last upload file (default)

o Generate a different file name for every upload (“Add timestamp to file name”)

-Upload barcodes to application window

At the beginning of the upload operation a modal popup is shown:

This message will be displayed as long as the upload operation is in progress. When all barcodes have been uploaded, the user will be shown a confirmation popup:

Note: the reader will emit an acknowledgement beep when the upload has completed.

If the “Upload barcodes to application window” option has been chosen, after clicking Upload, the following message will be shown:

The user should make sure their application is active, then click on the pop up and immediately go back to the application where they want the barcodes to be uploaded.

Note: the upload operation can be launched by scanning the corresponding barcode from their programming guide. The reader should be connected to the BaracodaManager before this is done.

BaracodaManager for PC – User Guide v3.39

- 67 -

Image 67

Contents BaracodaManager For PC User Guide Summary 10.1 Uploading Data Stored in Batch Mode Document Date Description Revision HistoryIntroduction BaracodaManager main window functions OverviewData Capture For Workforce Motion Button Corresponding action Install the BaracodaManager InstallationGetting started Using Bluetooth inquiry to find readersData Capture For Workforce Motion Data Capture For Workforce Motion Using Connect&Scan to connect readers Data Capture For Workforce Motion Data Capture For Workforce Motion Adding/removing a barcode reader Disconnecting a barcode readerSetting parameters of a barcode reader FunctionsField Functionality Baracoda Pencil settingsBluetooth settings Product settingsBatch mode settings Symbology settingsBaracodaPencil2 settings Batch mode settings Reader Decoded BL1000 settings Fly settings Batch mode settings Select to Activate Trigger mode Manual Scan Autoscan Engine Symbology settings Baracoda RoadRunners settings Batch mode settings Volume high or Symbology settings Baracoda RoadRunners Evolution settings Data Capture AAAFilenameBBBCCC.jpg, where Loss mode is Symbology settings Barcode height to the narrow element width Signature/image configuration settingsData Capture For Workforce Motion Rfid Baracoda TagRunners settingsBatch mode settings Beep Rfid settings Data Capture For Workforce Motion Baracoda DualRunners settings Data Capture Batch mode settings Volume Allow High or Symbology settings Rfid settings Data Capture For Workforce Motion Signature/image configuration settings With the exception of the Add mode. To set the batch mode Series settings for BC2604, BL2604, BLR2604 Batch mode settings Product settings Advanced settings BCM2604 settings Product settings Baracoda ToughRunners and ScanWear settings Activate no data loss Bluetooth settings IdBlue settings Batch mode settings Bluetooth settings Uploading data stored in batch mode Firmware upgrade Data Capture For Workforce Motion Terminal plugin PluginsKEmul plugin IdBlue plugin Btrbsw plugin Rfid Plugin PicturePlugin