Data Capture
for Workforce
in Motion
19.6. PicturePlugin
The PicturePlugin can be used to capture signatures or take pictures with the RoadRunners Evolution 2D or DualRunners 2D readers having a firmware version 1.47 or newer.
Please note that before the reader can capture a signature, it should be configured (refer to section Signature/image configuration settings for the RoadRunners Evolution 2D and Signature/image configuration settings for DualRunners 2D) and in real time mode (not in batch mode).
The following screenshot shows the main window of the PicturePlugin:
As soon as the user reads the signature reference barcode, the captured signature area will be shown in the middle of the window. The image can be saved with the Save data button (in jpeg format).
In order to start to take a picture, the user will need to either scan the Take Picture barcode (please refer to the user Guide of the reader to find this barcode) or click the Take picture button on the plugin’s main window. In response the reader will turn on the beam and the user will need to press the trigger button to take the picture. The resulting picture will also be shown in the middle of the screen.
BaracodaManager for PC – User Guide v3.39 | - 75 - |