Baracoda Bluetooth Headset manual Volume Allow High or

Data Capture

for Workforce

in Motion

12.2. Product settings

To find out more about the product settings, please refer to the barcode reader User Manual.

Check the box to activate Baracoda Header

Check the box to activate timestamp

Check the box to activate prefix/suffix

Check the box to activate beep when data is read

Check the box to activate beep when

a barcode is acknowledged by the host PC (when No data loss mode is active)

Select to activate trigger mode of the scan engine (default)

Select to activate autoscan or smart

or manual autoscan mode of the reader

Select
beep	Select to
volume	allow
(high or	duplicate
low)	scans

Select to activate aiming trigger mode of the scan engine

Select to disable duplicate scans (error beep when

aduplicate barcode is read)

Select to disable duplicate scans (duplicates not decoded by the reader)

Check the box to Activate no data loss

mode (acknowledgement)

Check the box to activate the data

nature byte (0 for barcodes and 1 for RFID tag IDs)

When Prefix/Suffix box is checked, select Data format (ASCII or Hex) and type values in

active fields.

Configure the number of barcodes (0 or MAX) that are buffered by the reader (real time mode, reading barcodes while disconnected)

12.3. Bluetooth settings

To find out more about the Bluetooth settings, please refer to the barcode reader User Manual.

Select max BT power allowed by law in your country.

Check the box to activate PIN code authentication

Select the duration of Sniff period

Reader’s PIN code, used when Security is enabled

BaracodaManager for PC – User Guide v3.39 - 49 -