Baracoda Bluetooth Headset manual Beep

Page 43

Data Capture

for Workforce

in Motion

11.2. Product settings

To find out more about the product settings, please refer to the barcode reader User Manual.

Check the box to activate Baracoda Header

Check the box to activate timestamp

Check the box to activate prefix/suffix

Check the box to activate beep when an RFID tag is decoded

Check the box to activate beep when an RFID tag is acknowledged by the host PC (when No data loss mode is active)

Select to activate trigger mode of the RFID engine (default)

Select to activate

Select

Select to

allow

beep

autoscan

duplicate

volume

or manual

scans

(high or

autoscan

 

low)

 

mode of the RFID

 

 

 

engine

 

 

Select to activate

 

 

smart autoscan

 

 

mode of the RFID

 

 

engine

 

 

Check the box to Activate no data loss

mode (acknowledgement)

When Prefix/Suffix box is checked, select Data format (ASCII or Hex) and type values in

active fields.

 

Configure the

 

number of RFID tags

 

(0 or MAX) that are

 

buffered by the

 

reader (real time

 

mode, reading tags

 

while disconnected)

Select to disable

Select to disable

duplicate scans

duplicate scans

(duplicates not

(error beep when

decoded by the

a duplicate RFID

reader)

tag is read)

11.3. Bluetooth settings

To find out more about the Bluetooth settings, please refer to the barcode reader User Manual.

Select max BT power allowed by law in your country.

Check the box to activate PIN code authentication

Select the duration of Sniff period

Reader’s PIN code, used when Security is enabled

BaracodaManager for PC – User Guide v3.39

- 43 -

Image 43
Contents BaracodaManager For PC User Guide Summary 10.1 Uploading Data Stored in Batch Mode Document Date Description Revision HistoryIntroduction BaracodaManager main window functions OverviewData Capture For Workforce Motion Button Corresponding action Install the BaracodaManager InstallationGetting started Using Bluetooth inquiry to find readersData Capture For Workforce Motion Data Capture For Workforce Motion Using Connect&Scan to connect readers Data Capture For Workforce Motion Data Capture For Workforce Motion Adding/removing a barcode reader Disconnecting a barcode readerSetting parameters of a barcode reader FunctionsField Functionality Baracoda Pencil settingsBluetooth settings Product settingsBatch mode settings Symbology settingsBaracodaPencil2 settings Batch mode settings Reader Decoded BL1000 settings Fly settings Batch mode settings Select to Activate Trigger mode Manual Scan Autoscan Engine Symbology settings Baracoda RoadRunners settings Batch mode settings Volume high or Symbology settings Baracoda RoadRunners Evolution settings Data Capture AAAFilenameBBBCCC.jpg, where Loss mode is Symbology settings Barcode height to the narrow element width Signature/image configuration settingsData Capture For Workforce Motion Rfid Baracoda TagRunners settingsBatch mode settings Beep Rfid settings Data Capture For Workforce Motion Baracoda DualRunners settings Data Capture Batch mode settings Volume Allow High or Symbology settings Rfid settings Data Capture For Workforce Motion Signature/image configuration settings With the exception of the Add mode. To set the batch mode Series settings for BC2604, BL2604, BLR2604 Batch mode settings Product settings Advanced settings BCM2604 settings Product settings Baracoda ToughRunners and ScanWear settings Activate no data loss Bluetooth settings IdBlue settings Batch mode settings Bluetooth settings Uploading data stored in batch mode Firmware upgrade Data Capture For Workforce Motion Terminal plugin PluginsKEmul plugin IdBlue plugin Btrbsw plugin Rfid Plugin PicturePlugin