Baracoda Bluetooth Headset manual Getting started, Using Bluetooth inquiry to find readers

Page 11

Data Capture

for Workforce

in Motion

3.Getting started

This section shows the user how to configure the BaracodaManager to connect and use their barcode reader(s).

Since the BaracodaManager version 3.38, two ways of connecting a reader are possible:

-using Bluetooth inquiry to find a reader and then connect it (available on all supported Bluetooth stacks)

-using the Connect&Scan method (scanning a connect barcode) to connect a reader without launching a Bluetooth inquiry (available only on the Microsoft Bluetooth stack)

3.1.Using Bluetooth inquiry to find readers

To configure the barcode reader(s):

1.Turn on the barcode reader(s) and the computer on which the BaracodaManager has been installed.

2.Double-click the BaracodaManager icon in the system tray (if you do not find the BaracodaManager icon, start the BaracodaManager). The BaracodaManager window appears:

-the “Devices in Range” section of the window lists the barcode reader(s) the Baracoda

Manager finds within Bluetooth radio range

-the BaracodaManager displays a progress bar just below the above list while it searches for discoverable barcode readers

Note: if the user has already run the BaracodaManager and configured their barcode reader(s), they should go to step 9 below.

BaracodaManager for PC – User Guide v3.39

- 11 -

Image 11

Contents BaracodaManager For PC User Guide Summary 10.1 Uploading Data Stored in Batch Mode Document Date Description Revision HistoryIntroduction BaracodaManager main window functions OverviewData Capture For Workforce Motion Button Corresponding action Install the BaracodaManager InstallationGetting started Using Bluetooth inquiry to find readersData Capture For Workforce Motion Data Capture For Workforce Motion Using Connect&Scan to connect readers Data Capture For Workforce Motion Data Capture For Workforce Motion Adding/removing a barcode reader Disconnecting a barcode readerSetting parameters of a barcode reader FunctionsField Functionality Baracoda Pencil settingsBluetooth settings Product settingsBatch mode settings Symbology settingsBaracodaPencil2 settings Batch mode settings Reader Decoded BL1000 settings Fly settings Batch mode settings Select to Activate Trigger mode Manual Scan Autoscan Engine Symbology settings Baracoda RoadRunners settings Batch mode settings Volume high or Symbology settings Baracoda RoadRunners Evolution settings Data Capture AAAFilenameBBBCCC.jpg, where Loss mode is Symbology settings Barcode height to the narrow element width Signature/image configuration settingsData Capture For Workforce Motion Rfid Baracoda TagRunners settingsBatch mode settings Beep Rfid settings Data Capture For Workforce Motion Baracoda DualRunners settings Data Capture Batch mode settings Volume Allow High or Symbology settings Rfid settings Data Capture For Workforce Motion Signature/image configuration settings With the exception of the Add mode. To set the batch mode Series settings for BC2604, BL2604, BLR2604 Batch mode settings Product settings Advanced settings BCM2604 settings Product settings Baracoda ToughRunners and ScanWear settings Activate no data loss Bluetooth settings IdBlue settings Batch mode settings Bluetooth settings Uploading data stored in batch mode Firmware upgrade Data Capture For Workforce Motion Terminal plugin PluginsKEmul plugin IdBlue plugin Btrbsw plugin Rfid Plugin PicturePlugin