Baracoda Bluetooth Headset manual Baracoda TagRunners settings, Rfid

Data Capture

for Workforce

in Motion

11.Baracoda TagRunners settings

The Settings window displays eight buttons and five groups:

-General information

-Current Operating Mode information

-Shutdown Timer information

-Battery

-Other Settings

The following two tables show the General information fields:

Field	Functionality
Name	Bluetooth name of the RFID reader
Application	Version of embedded Baracoda software
RFID	Version of the RFID engine

The table below shows the user the Operating Mode options that they can set:

Field	Functionality
Batch	Set the batch mode: scanned barcodes are stored in non-volatile memory and
	can be uploaded to the application later (click on “Batch config” for more
	advanced settings)
Real time	Set the Real-time mode: scanned barcodes are transmitted to the application
	immediately when the Bluetooth radio connection is active. If the connection
	is not established the barcodes are lost, unless “Enable Buffering” is set (see
	below).
The following table shows the Shutdown Timer fields that you can set:
Field	Functionality
When connected	Set the delay (in minutes) after which the barcode reader switches off, when
	the barcode reader is connected and without any activity.
When not connected	Set the delay (in minutes) after which the barcode reader switches off, when
	the barcode reader is not connected and without any activity.

The following table shows the Battery field:

Field	Functionality
Battery	Battery level (0-100%) and its current charging status.

The following table shows the Other Settings buttons that you can set:

BaracodaManager for PC – User Guide v3.39 - 41 -