Baracoda Bluetooth Headset manual Baracoda ToughRunners and ScanWear settings

Data Capture

for Workforce

in Motion

15.Baracoda ToughRunners and ScanWear settings

The Settings window displays eight buttons and five groups:

-General information

-Current Operating Mode information

-Shutdown Timer information

-Battery

-Other Settings

The following two tables show the General information fields:

Field	Functionality
Decoder	Version of embedded Baracoda software
Name	Bluetooth name of the barcode reader
Radio	Version of Bluetooth radio
Boot	Version of bootloader

The table below shows the user the Operating Mode options that they can set:

Field	Functionality
Real time	Set the Real-time mode: scanned barcodes are transmitted to the application
	immediately when the Bluetooth radio connection is active. If the connection
	is not established the barcodes are lost, unless “Enable Buffering” is set (see
	below).
Master	Set the Master mode: The barcode reader automatically creates connection
	to the specified Host device when the user scans a barcode. Then the reader
	works as in real time mode.
Host addr.	For use in Master mode : Set, in the address field, the Bluetooth address of
	the host device the reader has to connect to.
The following table shows the Shutdown Timer fields that you can set:
Field	Functionality
Shutdown timer	Set the delay (in minutes) after which the barcode reader switches off
	without any activity.
The following table shows the Battery field:
Field	Functionality
Battery	Battery level (OK or low).

BaracodaManager for PC – User Guide v3.39 - 61 -