Baracoda Bluetooth Headset manual Baracoda RoadRunners settings

Page 30

Data Capture

for Workforce

in Motion

9.Baracoda RoadRunners settings

The Settings window displays eight buttons and five groups:

-General information

-Current Operating Mode information

-Shutdown Timer information

-Battery

-Other Settings

The following two tables show the General information fields:

Field

Functionality

Decoder

Version of embedded Baracoda software

Name

Bluetooth name of the barcode reader

The table below shows the user the Operating Mode options that they can set:

Field

Functionality

Batch

Set the batch mode: scanned barcodes are stored in non-volatile memory and

 

can be uploaded to the application later (click on “Batch config” for more

 

advanced settings)

Real time

Set the Real-time mode: scanned barcodes are transmitted to the application

 

immediately when the Bluetooth radio connection is active. If the connection

 

is not established the barcodes are lost, unless “Enable Buffering” is set (see

 

below).

Master

Set the Master mode: The barcode reader automatically creates connection

 

to the specified Host device when the user scans a barcode. Then the reader

 

works as in real time mode.

Host addr.

For use in Master mode : Set, in the address field, the Bluetooth address of

 

the host device the reader has to connect to.

The following table shows the Shutdown Timer fields that you can set:

Field

Functionality

When connected

Set the delay (in minutes) after which the barcode reader switches off, when

 

the barcode reader is connected and without any activity.

When not connected

Set the delay (in minutes) after which the barcode reader switches off, when

 

the barcode reader is not connected and without any activity.

The following table shows the Battery field:

Field

Functionality

 

Battery

Battery level (0-100%) and its current charging status.

 

BaracodaManager for PC – User Guide v3.39

- 30 -

Image 30
Contents BaracodaManager For PC User Guide Summary 10.1 Uploading Data Stored in Batch Mode Revision History Document Date DescriptionIntroduction Overview BaracodaManager main window functionsData Capture For Workforce Motion Button Corresponding action Installation Install the BaracodaManagerUsing Bluetooth inquiry to find readers Getting startedData Capture For Workforce Motion Data Capture For Workforce Motion Using Connect&Scan to connect readers Data Capture For Workforce Motion Data Capture For Workforce Motion Functions Disconnecting a barcode readerSetting parameters of a barcode reader Adding/removing a barcode readerBaracoda Pencil settings Field FunctionalityProduct settings Bluetooth settingsSymbology settings Batch mode settingsBaracodaPencil2 settings Batch mode settings Reader Decoded BL1000 settings Fly settings Batch mode settings Select to Activate Trigger mode Manual Scan Autoscan Engine Symbology settings Baracoda RoadRunners settings Batch mode settings Volume high or Symbology settings Baracoda RoadRunners Evolution settings Data Capture AAAFilenameBBBCCC.jpg, where Loss mode is Symbology settings Signature/image configuration settings Barcode height to the narrow element widthData Capture For Workforce Motion Baracoda TagRunners settings RfidBatch mode settings Beep Rfid settings Data Capture For Workforce Motion Baracoda DualRunners settings Data Capture Batch mode settings Volume Allow High or Symbology settings Rfid settings Data Capture For Workforce Motion Signature/image configuration settings With the exception of the Add mode. To set the batch mode Series settings for BC2604, BL2604, BLR2604 Batch mode settings Product settings Advanced settings BCM2604 settings Product settings Baracoda ToughRunners and ScanWear settings Activate no data loss Bluetooth settings IdBlue settings Batch mode settings Bluetooth settings Uploading data stored in batch mode Firmware upgrade Data Capture For Workforce Motion Plugins Terminal pluginKEmul plugin IdBlue plugin Btrbsw plugin Rfid Plugin PicturePlugin