Baracoda Bluetooth Headset manual Activate no data loss

Data Capture

for Workforce

in Motion

The following table shows the Other Settings buttons that you can set:

Button	Functionality
Product	Access product settings (see below)
Bluetooth	Access Bluetooth connection settings (see below)
Symbology	Access types of barcodes settings (see below)

The table below shows the actions you can take with the buttons:

Button	Functionality
Cancel	Close window with no changes.
Save	Store and send the new parameters to the barcode reader.
Default Settings	Restore the factory settings. The barcode reader (flash) memory is erased and
	the factory default parameters are restored. Check the device manual for
	details.
Upgrade	Ugrade the reader’s firmware. Please check Chapter 16 for details.

15.1. Product settings

To find out more about the product settings, please refer to the barcode reader User Manual.

			Check the box to
			Activate no data loss
Check the box			mode
to activate			(acknowledgement)
Baracoda
Header
			When Prefix/Suffix
			box is checked,
			select Data format
Fill in text to			(ASCII or Hex)
			and type values in
activate			active fields.
prefix/suffix
			Configure the number
Check the box			of barcodes (0 or
			MAX) that are
to activate
			buffered by the
beep when a
			reader (real time
barcode is
			mode, reading
decoded
			barcodes while
			disconnected). Not
Check the box to			available yet.
activate beep when
a barcode is		Select to	Select to set the trigger level of
acknowledged by	Select to set the
the host PC (when	reading mode of	activate	wrist motion necessary to launch
No data loss mode is	the scan engine	reader	an automatic scan
active)	(default trigger)	vibration

Select to set the no duplicate mode of the reader (by default duplicates are allowed)

BaracodaManager for PC – User Guide v3.39 - 62 -