2.Search for a new station as described in the section above.
3.Tap the CHANNEL “B” button within 20 seconds of finding the sta- tion to save the current station.
4.If you don’t save the station, the Radio will exit search mode with- out saving the current station. You can still continue to listen to the current unsaved station. Tapping the CHANNEL “B” Button in this case will move to the next saved station.
You can store up to six stations.
7.2CABLE CONNECTING YOUR MP3 PLAYER OR OTHER
EXTERNAL AUDIO SOURCES
Using the auxiliary line-in port for cable connectivity
Your scala rider G4 headset has an auxiliary jack which allows you to connect
mm- 1/8” stereo jacks) to the headset by using the enclosed cable.
1.Make sure the headset is on Standby mode, flashing slowly in Blue.
2.Connect the MP3 cable to your MP3 player/audio source’s
headset jack and insert the other end of the cable into the Auxiliary jack.
3. Operate the MP3 Player | MP3 /Aux | |
device by using its own | jack | |
|
| |
buttons as usual (FF/REW/ |
|
|
PLAY/PAUSE). |
|
|
Volume can be adjusted through the MP3 Player or the Volume Buttons of the headset.
Any other audio connection will automatically mute the MP3 Player. The audio signal will return only when headset is once again in Standby mode.
NOTE: While listening to your MP3 player, the VOX feature is disabled
8. USING THE MOBILE PHONE
INITIATING AND RECEIVING MOBILE PHONE CALLS
BASIC FUNCTIONS
Answer a call | During an incoming call, tap the Mobile But- |
| ton or speak loudly any word of your choice |
|
|
Reject a call | Remain silent for 15 seconds, OR press and |
| hold the Mobile Button for 3 seconds during |
| an incoming call |
|
|
Terminate a call | Tap the Mobile Button during a call, or let the |
| other party terminate the call |
|
|
Voice Dial | During Standby, tap the Mobile Button and pro- |
| nounce loudly the name of the person you wish |
| to call. This feature is supported only by mobile |
| phones that include the Voice Dial feature |
|
|
Redial | During Standby, tap the Mobile Button twice |
|
|
ADVANCED FUNCTIONS FOR | |
Add/Remove CHANNEL | Tap the CHANNEL “A” button while on a phone |
“A” headset to/from | call |
phone call |
|
|
|
Add/Remove CHANNEL | Tap the CHANNEL “B” button while on a phone |
“B” headset to/from | call |
phone call |
|
When the headset is on an active phone call, any Intercom call request will be automatically rejected.
Once the phone call is terminated, you can initiate and accept Inter- com calls.
12 scala rider® G4™ PowerSet