Using the Intercom, Status Lights, Introduction

Flip-up Antenna for extended range

STATUS LIGHTS

LED Indication	Status

None	Headset is off

1 blue flash every 3 seconds	Standby – No call is in progress

2 blue flashes every 3 seconds	Audio active

1 red flash every 3 seconds	Standby - Battery is low

2 red flashes every 3 seconds	Low battery while audio is active

Solid red	Charging

9.USING THE INTERCOM

9.1INTRODUCTION

The scala rider PowerSet provides you with an impressive Bike-to- Bike Intercom range by simply flipping

up the antenna. The flip-up antenna allows you to maximize the intercom range with other bikers at up to 1 mile /

1.6km (subject to terrain). The antenna is also useful when riding in dense urban

environments that may affect the transmission quality. You may keep the flip-up antenna open when not using

the intercom, even though there is no particular need to do so.

The scala rider G4 PowerSet package contains two factory paired G4 headsets. To set up additional Intercom Bluetooth connections, you must first pair your G4 headset with the other headsets.

Pairing is a one time process. Once completed, the headsets will remain paired and automatically recognize each other whenever they are within range.

For details on Intercom use with other scala rider headsets, please refer to section 9.11 below

Your headset has two Intercom channels available for headset- to-headset connections. Therefore, your G4 can communicate simultaneously with up to two other headsets. If one of these other headsets is connected to yet another G4 headset, then all four participants can enter into a 4-way conference mode (see section 9.10c below).

9.2 BACKWARDS COMPATIBILITY

Your scala rider G4 can also conduct Intercom communications with earlier scala rider models in different configurations and you can always change your preferences.

There are four other scala rider models available that your G4 can connect to, and each of these connections comes with specific char- acteristics and / or limitations.

In terms of range, Intercom communications between your G4 and another scala rider unit is limited to the distance of the lesser-range device. For example, connecting your G4 with a Q2 unit will enable intercom distances of up to 500 m / 540 yards, which is the maximum rated distance the Q2 can achieve.

In the section below you can find out how to pair your G4 with other scala rider models, such as the “Q2™”, “Solo™ “, “FM™ “, or a Driver unit of the “TeamSet™”. In addition, your headsets are also fully compatible with the Schuberth SRC-System™. For details, visit www.cardosystems.com/src.

9.3 BEFORE STARTING THE INTERCOM

Your scala rider G4 headset has two buttons designated for quick connection to two other headsets. These other headsets are referred to as CHANNEL “A” and CHANNEL “B”. In the following sections you will also learn how to add a third participant and conduct an intercom conference mode.

English

scala rider® G4™ PowerSet