Cardo G4 manual Basic Setup and Configuration, General Functions, Spoken Status Announcements

Your wall charger and USB adaptor cable serve two purposes:

1.Charging your headset from any A/C wall socket or from a USB port on your

computer (charging time from computer takes longer)

2.Downloading software upgrades from Windows™ XP or Vista™ based computers (see section 4.4 for details).

4.  BASIC SETUP AND CONFIGURATION

4.1 GENERAL FUNCTIONS

DESIRED RESULT	REQUIRED ACTION
Turn on the headset	Press the Mobile Button steadily for at least four
	seconds
	Led indication: Three blue flashes.
	Audio feedback: Ascending tone (low-high).
Turn off the headset	Press the Mobile Button steadily for at least three
	seconds
	Led indication: Three red flashes.
	Audio feedback: Descending tone (high-low).
Increase the volume	Tap the Volume Up Button
Decrease the volume Tap the Volume Down Button

4.2 SPOKEN STATUS ANNOUNCEMENTS

Your scala rider G4 headset offers various audio status messages sent through your speakers. Among others, it will announce your con- nection state, e.g. whether you are in mobile phone or on intercom mode, it will confirm changes of such modes and more. By default the feature is ON, and can be disabled as outlined below.

The Voice menu can be set at any one of the available language op- tions. In the future, more languages will be available for downloading from our website (see section 4.4 for Firmware Upgrade).

Entering the Voice Menu: Press and hold the CHANNEL “A” button and CHANNEL “B” button simultaneously for 3 seconds while the headset is on standby. Once entering the system, follow the voice instructions in English or choose your preferred language.

Disable/Enable status announcements: Press and hold the

Volume Down Button for 6 seconds.

ON: Led indication: Solid blue + Audio feedback: One short beep

OFF: Led indication: Solid red + Audio feedback: Two short beeps

4.3 AUDIO SOURCES AND PRIORITIES

The different audio sources connected to the G4 are prioritized as shown below, i.e. the higher priority source will always override and interrupt the lower one.

For example, incoming mobile phone calls will interrupt ongoing Intercom calls, while incoming intercom calls will interrupt the audio from the built-in FM Radio etc.

English

Mute	Tap simultaneously Volume Up and Volume Down
	while any audio is on
Battery Level	Press and hold the Volume Up Button for three
Indicator	seconds
	Blue light = Battery is fully charged
	Red/blue light = Battery is half full
	Red light = Battery is almost empty

Higher Priority



Lower Priority

1.Mobile phone audio or GPS instructions (device specific)

2.Intercom

3.A2DP audio source

4.FM Radio (built-in)

5.Auxiliary Line-In Port (for corded connection e.g. MP3 players).

scala rider® G4™ PowerSet 5