Nortel Networks NN10300-009 Assigning a directory entry to a feature key, Feature submenu appears

30Using the Feature menu

Step Action

1From the main menu, open the Feature menu.

A list of the feature keys and their current assignments appears.

2Select a key to change.

The Feature submenu appears.

3Select and open Assign.

If the key you selected in step 2 is assigned to a Centrex feature, these soft key labels appear: Key Type and Autoscroll.

If the selected key is assigned to a local feature, these soft key labels appear: Key Type and Feature.

4Press Key Type.

The Key Type screen appears. A check mark appears beside the type currently assigned to the key.

5Perform one of these actions:

•To change Central to Local, select Local.

•To change Local to Central, select Central.

6Press Ok.

The key type is changed and a check mark appears beside the selection.

7To assign a directory entry to a Local key, see “Assigning a directory entry to a feature key” (page 30).

--End--

Assigning a directory entry to a feature key

Follow this procedure to assign a directory entry to a feature key. Assigning a directory entry to a feature key gives you the ability to speed dial that number when you press the key.

Prerequisites

The feature key you select must be defined as Local, see “Defining the key type” (page 29).

Step Action

1From the main menu, open the Feature menu.

A list of the feature keys and their current assignments appears.

2Select the key defined as Local. The Assign menu appears.

Carrier VoIP

Nortel IP Phone 2004 User Guide (CICM)

NN10300-009 09.01 Standard

4 July 2008

Copyright © 2008 Nortel Networks