AT&T 9452 user manual Mount the base on the wall

Page 10

INSTALLATION

4 Mount the base on the wall.

a) Align holes on base with mounting studs on wall jack.

b)Place power cord as shown, guiding it through tabs on base.

c)Pull base down on mounting studs until it locks into place.

4Plug the power cord into the outlet.

5Charge the handset battery.

Place the handset in the base. Charge the battery for at least 16 hours the first time. After the first charge, the battery is typically fully charged overnight.

6Check for dial tone.

After the batteries are charged, pick up the handset, press L, and listen for a dial tone. Then press l. If you don’t hear a dial tone, see

“IN CASE OF DIFFICULTY.”

Image 10

Contents Part 1 Important Product Information Advanced American Telephones. All rights reserved Contents Page About Caller ID with Call Waiting About the Spare Battery ChargerBefore YOU Begin About the Data PortInstallation Before You Install Install the handset battery Select base ringer volume for each lineCharge the handset battery Table/Desk InstallationConnect the power cord Connect the telephone line cordsCheck for dial tone Wall InstallationConnect the power cord to the phone Position the wall mount adapter on the baseMount the base on the wall Telephone Feature Setup Feature SetupTelephone Features Telephone Operation Three-Way Conference Calls Temporary Tone DialingConference Calls Four-Way Conference CallsCall Timer Switching from Handset to Base SpeakerphoneHeadset Jack Operating Range AT the Base MuteHold Base Ringer VolumeSpeakerphone Volume Page/IntercomView Call History Caller ID OperationDial a Number from Call History Erase All Call Records Erase a Call RecordDisplay Screen Messages Store a Directory Name & Number Telephone DirectoryChange/Replace a Stored Directory Number Store a Call History Record in Directory Edit a Directory Name & NumberErase a Directory Name & Number Dial a Directory NumberAbout Mailboxes Audible IndicatorsAbout Announcements Record Your Announcement Press Uuntil you hear Set outgoing messageAnswering System Feature Setup Feature SummaryPlay Messages Adjust Playback VolumeListen To, Save & Delete Messages Delete MessagesConnect with the Answering System Call Screening/InterceptRecord a Memo Voice MenuRemote Access Commands Message Window Display 99 ↔ FReplacing the Handset Battery Pack Charging the Handset Battery PackBatteries Installing a Spare Battery Spare battery compartment coverCase of Difficulty If the handset does not ring when you receive a callIf the phone doesn’t work at all, check these items first If messages are incomplete If you hear noise or interference when using the phoneIf you hear other calls while using your phone If you have difficulty hearing messagesIf CL appears in the Message Window If your outgoing announcement isn’t clearRemote Commands Answering SystemPress Machine is off press #0again