AT&T 9452 Temporary Tone Dialing, Three-Way Conference Calls, Four-Way Conference Calls

Page 13

TELEPHONE OPERATION

AT THE HANDSET

Temporary Tone Dialing

If you have dial pulse (rotary) service, you can change from dial pulse to touch tone dialing during a call by pressing *. This is useful if you need to send touch tone signals for access to telephone banking or long-distance services.

1Dial the number.

2Press *. Buttons pressed after this send touch tone signals.

3After you end the call, the phone automatically returns to dial pulse (rotary) service.

Conference Calls

Three-Way Conference Calls

You can use both lines at the same time to set up a three-way conference call from the handset.

1Answer or make a call on one line.

2Press H.

3Press the other LINE button, and make or answer another call.

4Press cto connect all parties. Both LINE buttons flash during a conference call.

5Press Oto end the entire conference call.

NOTE: If you want to end the call with just one side of a conference, press that LINE button, press O, and then press the other LINE button to speak with the other party.

Four-Way Conference Calls

You can set up a four-way conference call with Line 1, Line 2, the handset, and the base speakerphone.

1Establish a conference call at the handset (see “Three-Way Conference Calls” above).

2Press Lon the base.

3Press lon the base.

4Press con the base to connect all parties.

11

Image 13

Contents Part 1 Important Product Information Advanced American Telephones. All rights reserved Contents Page Before YOU Begin About the Spare Battery ChargerAbout Caller ID with Call Waiting About the Data PortBefore You Install InstallationSelect base ringer volume for each line Install the handset batteryConnect the power cord Table/Desk InstallationCharge the handset battery Connect the telephone line cordsConnect the power cord to the phone Wall InstallationCheck for dial tone Position the wall mount adapter on the base Mount the base on the wall Telephone Feature Setup Feature SetupTelephone Features Telephone Operation Conference Calls Temporary Tone DialingThree-Way Conference Calls Four-Way Conference CallsCall Timer Switching from Handset to Base SpeakerphoneHeadset Jack Operating Range Mute AT the BaseSpeakerphone Volume Base Ringer VolumeHold Page/IntercomView Call History Caller ID OperationDial a Number from Call History Erase All Call Records Erase a Call RecordDisplay Screen Messages Store a Directory Name & Number Telephone DirectoryChange/Replace a Stored Directory Number Erase a Directory Name & Number Edit a Directory Name & NumberStore a Call History Record in Directory Dial a Directory NumberAbout Mailboxes Audible IndicatorsAbout Announcements Press Uuntil you hear Set outgoing message Record Your AnnouncementFeature Summary Answering System Feature SetupListen To, Save & Delete Messages Adjust Playback VolumePlay Messages Delete MessagesRecord a Memo Call Screening/InterceptConnect with the Answering System Voice MenuRemote Access Commands 99 ↔ F Message Window DisplayReplacing the Handset Battery Pack Charging the Handset Battery PackBatteries Spare battery compartment cover Installing a Spare BatteryCase of Difficulty If the handset does not ring when you receive a callIf the phone doesn’t work at all, check these items first If you hear other calls while using your phone If you hear noise or interference when using the phoneIf messages are incomplete If you have difficulty hearing messagesIf your outgoing announcement isn’t clear If CL appears in the Message WindowAnswering System Remote CommandsMachine is off press #0again Press