AT&T 9452 user manual Table/Desk Installation, Connect the power cord, Charge the handset battery

Page 8
Power cord

INSTALLATION

Table/Desk Installation

1 Connect the power cord.

Use only the power cord supplied with this product. If you need a replacement, call 1 800 222-3111.

2Charge the handset battery.

Place the handset in the base. Charge the battery for at least 16 hours the first time. After the first charge, the battery is typically fully charged overnight.

3Connect the telephone line cord(s).

If you have a two- line jack, use only the 4-wire(RJ-14) line cord. Connect the line cord from the wall jack to the jack labeled L1/L1+L2 on the base. Make sure the plugs snap firmly into place.

Standard Modular

electrical telephone

outletjack

L1/L1+L2 jack Power cord

If you have two separate

jacks, use both long line cords. Connect a line cord from the wall jack you wish to designate as your Line 1 to the jack labeled L1/L1+L2 on the back of the base.

Connect the other line cord from the remaining wall jack to the jack labeled L2 on the back of the base. Make sure the plugs snap firmly into place.

Standard

 

electrical

 

outlet

L2 jack

 

L1/L1+L2 jack

Modular telephone jacks

6

Image 8
Contents Part 1 Important Product Information Advanced American Telephones. All rights reserved Contents Page About the Spare Battery Charger Before YOU BeginAbout Caller ID with Call Waiting About the Data PortInstallation Before You InstallInstall the handset battery Select base ringer volume for each lineTable/Desk Installation Connect the power cordCharge the handset battery Connect the telephone line cordsWall Installation Connect the power cord to the phoneCheck for dial tone Position the wall mount adapter on the baseMount the base on the wall Telephone Features Feature SetupTelephone Feature Setup Telephone Operation Temporary Tone Dialing Conference CallsThree-Way Conference Calls Four-Way Conference CallsHeadset Jack Switching from Handset to Base SpeakerphoneCall Timer Operating Range AT the Base MuteBase Ringer Volume Speakerphone VolumeHold Page/IntercomDial a Number from Call History Caller ID OperationView Call History Display Screen Messages Erase a Call RecordErase All Call Records Change/Replace a Stored Directory Number Telephone DirectoryStore a Directory Name & Number Edit a Directory Name & Number Erase a Directory Name & NumberStore a Call History Record in Directory Dial a Directory NumberAbout Announcements Audible IndicatorsAbout Mailboxes Record Your Announcement Press Uuntil you hear Set outgoing messageAnswering System Feature Setup Feature SummaryAdjust Playback Volume Listen To, Save & Delete MessagesPlay Messages Delete MessagesCall Screening/Intercept Record a MemoConnect with the Answering System Voice MenuRemote Access Commands Message Window Display 99 ↔ FBatteries Charging the Handset Battery PackReplacing the Handset Battery Pack Installing a Spare Battery Spare battery compartment coverIf the phone doesn’t work at all, check these items first If the handset does not ring when you receive a callCase of Difficulty If you hear noise or interference when using the phone If you hear other calls while using your phoneIf messages are incomplete If you have difficulty hearing messagesIf CL appears in the Message Window If your outgoing announcement isn’t clearRemote Commands Answering SystemPress Machine is off press #0again