AT&T 9452 user manual Telephone Feature Setup, Telephone Features

FEATURE SETUP

Telephone Feature Setup

1Make sure the handset is off.

2Press G.

3Press -until the feature you want to set is flashing on the screen. (Features are described in the chart below.)

4Press S.

5Press -or +until the setting you want flashes.

6Press S

— OR —

If necessary, use the keypad to enter numbers (for example, when you program the area code), then press S.

Telephone Features

Feature: Directions:

AREA-HOMESelect HOME. The screen displays ENTER AREA CODE. If you live in an area where you make calls within your own area code by dialing seven digits, enter your three-digit area code, then press S

— OR —

If you live in an area where all local calls require 10 digits (area code plus phone number, without dialing “1” first), enter 000for the area code, then press S.

AREA-LOCALAn area code is local if you do not dial “1” before the area code. Enter up to five three-digit local area codes. Select LOCAL, use -or +to move from area code #1 through area code #5, and enter area codes. Press Sto save.

KEY BEEPS If you turn this feature on, the handset sounds a tone every time you press a button. Select KEYBEEPS, press - until OFF or ON is flashing, then press S.

RINGER You can choose from four different ringers for each line. Press -or +until LINE 1 or LINE 2 is flashing, then press S. Press -to hear the different ringers, then press Sto save the last ringer heard or choose OFF. Repeat for the other line, then press O.

NOTE: When editing an area code, use +to delete existing digits, then enter the new area code. Press Sto save.

9