AT&T 9452 Wall Installation, Check for dial tone, Position the wall mount adapter on the base

Page 9

INSTALLATION

4Check for dial tone.

After the batteries are charged, pick up the handset, press L, and listen for a dial tone. Then press l. If you don’t hear a dial tone, see

“IN CASE OF DIFFICULTY.”

Wall Installation

1 Position the wall mount adapter on the base.

Wall mount adapter

Align tabs on wall mount adapter with holes on bottom of base. Snap wall mount adapter firmly into place.

2 Connect the power cord to the phone.

Use only the power cord supplied with this product. If you need a replacement, call 1 800 222-3111.

3Connect the telephone line cord(s). See illustrations on previous page for connections. Use the short line cord instead of a long line cord for the connection to the L1/L1+L2 phone jack.

Image 9

Contents Part 1 Important Product Information Advanced American Telephones. All rights reserved Contents Page Before YOU Begin About the Spare Battery ChargerAbout Caller ID with Call Waiting About the Data PortBefore You Install InstallationSelect base ringer volume for each line Install the handset batteryConnect the power cord Table/Desk InstallationCharge the handset battery Connect the telephone line cordsConnect the power cord to the phone Wall InstallationCheck for dial tone Position the wall mount adapter on the baseMount the base on the wall Feature Setup Telephone Feature SetupTelephone Features Telephone Operation Conference Calls Temporary Tone DialingThree-Way Conference Calls Four-Way Conference CallsSwitching from Handset to Base Speakerphone Call TimerHeadset Jack Operating Range Mute AT the BaseSpeakerphone Volume Base Ringer VolumeHold Page/IntercomCaller ID Operation View Call HistoryDial a Number from Call History Erase a Call Record Erase All Call RecordsDisplay Screen Messages Telephone Directory Store a Directory Name & NumberChange/Replace a Stored Directory Number Erase a Directory Name & Number Edit a Directory Name & NumberStore a Call History Record in Directory Dial a Directory NumberAudible Indicators About MailboxesAbout Announcements Press Uuntil you hear Set outgoing message Record Your AnnouncementFeature Summary Answering System Feature SetupListen To, Save & Delete Messages Adjust Playback VolumePlay Messages Delete MessagesRecord a Memo Call Screening/InterceptConnect with the Answering System Voice MenuRemote Access Commands 99 ↔ F Message Window DisplayCharging the Handset Battery Pack Replacing the Handset Battery PackBatteries Spare battery compartment cover Installing a Spare BatteryIf the handset does not ring when you receive a call Case of DifficultyIf the phone doesn’t work at all, check these items first If you hear other calls while using your phone If you hear noise or interference when using the phoneIf messages are incomplete If you have difficulty hearing messagesIf your outgoing announcement isn’t clear If CL appears in the Message WindowAnswering System Remote CommandsMachine is off press #0again Press