BT 3200 SMS manual Safety information, General, Cleaning, Environmental

Page 12

Synergy 3200 SMS user guide ~ 4th Edition ~ 16th October ’02 ~ 4678

INTRODUCTION

Safety information

General

Only use the power supply included with the product. Using an unauthorised power supply will invalidate your guarantee and may damage the telephone. The item code for the mains power supply is 872260.

Do not open the handset or base station. This could expose you to high voltages or other risks. Contact the Synergy Helpline 08706 058 047 for all repairs.

Radio signals transmitted between the handset and base may cause interference to hearing aids.

It is recommended that advice from a qualified medical expert be sought before using this product in the vicinity of emergency/intensive care medical equipment.

It is recommended that if you have a pacemaker fitted you check with a medical expert before using this product.

Your product may interfere with other electrical equipment, e.g. TV and radio sets, clock/alarms and computers if placed too close. It is recommended that you place your product at least one metre away from such appliances to minimise any risk of intereference.

Never dispose of batteries in a fire. There is a serious risk of explosion and/ or the release of highly toxic chemicals.

Cleaning

Simply clean the handset and base station with a damp (not wet) cloth, or an anti-static wipe. Never use household polish as this will damage the product. Never use a dry cloth as this may cause a static shock.

Environmental

Do not expose to direct sunlight.

The product may heat up when the battery pack is being recharged. This is normal. However, we recommend that you do not place the product on antique/veneered wood to avoid damage.

Do not stand your product on carpets or other surfaces which generate fibres, or place it in locations preventing the free flow of air over its surfaces.

Do not submerge any part of your product in water and do not use it in damp conditions, such as bathrooms.

Do not expose your product to fire, explosive or other hazardous conditions.

There is a slight chance that your phone could be damaged by an electrical storm. We recommend that you unplug the power and telephone line cord for the duration of the storm.

10

Page 11 Page 13
Image 12
Page 11 Page 13
Contents BT Synergy 3200 SMS Page At a glance HandsetBase 29 Jun 1025Quick Guide Information for the handset settings Menu Structure DD/MM HH/MM Menu Structure Using the telephone This guideIntroduction DectUnpacking your Synergy 3200 SMS For your recordsOne telephone line cord One belt clip Safety information CleaningGeneral EnvironmentalSetting up Connect the power supply to the baseInstall the batteries Battery low warning Use itConnect the telephone line cord to the base station Fit the belt clip onto the back of the handset if requiredUsing the telephone Making and receiving callsHandsfree RedialYou reach Handset Menu Secrecy Name and number PhonebookReach Ed. Phonebook Add EntryTo enter a pause in a stored number Hold the UP button until aTo dial a number from Phonebook PhonebookTo edit Phonebook names and numbers Reach Ed. PhonebookReach Edit Entry To delete a Phonebook name and numberPaging handsets Baby callBabycall Room monitor mode Monitor modeOff Handset settings Time and dateTo Keypad Lock and press  buttonSelect On Press the UP button to selectKey Press, Low Battery or To Handset Menu and pressOut of Range To name a handset Use the Down button to scrollScroll to Handset Name Name already setBase settings To adjust the base ringer volumeScroll to Setup and press Use the Down button toScroll to PIN Code and press Show NEW Code?Scroll to Default and press Default settings are Earpiece volumeDisplay will flash Base 1 Then SynergyCaller Display and Call Waiting Caller DisplayCaller information not available 0800 800Calls list When the number you want Call WaitingTo delete To delete is displayed, pressTo register a handset to the base At the baseAt the handset Press the UP or Down buttonHandset is registered To de-register a handset from the baseHandset Shows Confirm?Setting 0000 and press To register a handset to a different make of base stationTo see the base station identity NumberInternal calls Transferring callsTo make an internal call to another handset Until Internal Call isThree-way conversation During a call with an externalCaller Press the buttonTo switch ring priority setting on/off Ring Priority and pressSelect On or Off Help Replacing the handset batteriesTelephone problems Possible cause Solution No display appearsTelephone problems Possible cause SolutionGuarantee General informationSwitchboard compatibility Switchboard external line access codeTechnical information RecallTo Setup To Pabx SetupTo Pabx Display shows PIN Code?Index REN Ringer Equivalence Number TTE Offices worldwide
Top Page Image Contents