BT 3200 SMS manual Setting up, Connect the power supply to the base, Install the batteries

Page 13

Synergy 3200 SMS user guide ~ 4th Edition ~ 16th October ’02 ~ 4678

Setting up

Follow these steps to set up your Synergy 3200 SMS ready for use

Plan the location	Note

Position your Synergy 3200 SMS within 2 metres of a power socket and phone socket otherwise extension cables will be required.

Make sure it is at least 1 metre away from other electrical products to avoid interference.

Do not place your Synergy 3200 SMS product in the bathroom or other humid areas.

1Connect the power supply to the base

Plug the power adaptor into the mains power socket and switch on. The green Power/In Use light comes on.

The base station must be plugged into the mains power socket at all times.

2Install the batteries

2 x NiMH AAA rechargeable batteries are supplied.

Install the batteries as shown.

Slide the battery compartment cover into place (the battery cover may be found in the packaging with the batteries).

3Charge the handset batteries for at least 16 hours

Before you use your Synergy 3200 SMS for the first time, it is important to have the handset batteries fully charged. The batteries need to charge continuously for at least 16 hours to reach full charge.

SETTING UP

11

Image 13

Contents BT Synergy 3200 SMS Page Handset At a glance29 Jun 1025 BaseQuick Guide Information for the handset settings Menu Structure DD/MM HH/MM Menu Structure This guide Using the telephoneDect IntroductionFor your records Unpacking your Synergy 3200 SMSOne telephone line cord One belt clip Cleaning Safety informationGeneral EnvironmentalConnect the power supply to the base Setting upInstall the batteries Use it Battery low warningFit the belt clip onto the back of the handset if required Connect the telephone line cord to the base stationMaking and receiving calls Using the telephoneRedial HandsfreeYou reach Handset Menu Name and number Phonebook SecrecyReach Ed. Phonebook Add EntryHold the UP button until a To enter a pause in a stored numberTo dial a number from Phonebook PhonebookReach Ed. Phonebook To edit Phonebook names and numbersReach Edit Entry To delete a Phonebook name and numberBaby call Paging handsetsBabycall Monitor mode Room monitor modeOff Time and date Handset settings button To Keypad Lock and pressSelect On Press the UP button to selectTo Handset Menu and press Key Press, Low Battery orOut of Range Use the Down button to scroll To name a handsetScroll to Handset Name Name already setTo adjust the base ringer volume Base settingsUse the Down button to Scroll to Setup and pressScroll to PIN Code and press Show NEW Code?Default settings are Earpiece volume Scroll to Default and pressDisplay will flash Base 1 Then SynergyCaller Display Caller Display and Call WaitingCaller information not available 0800 800Calls list Call Waiting When the number you wantTo delete To delete is displayed, pressAt the base To register a handset to the baseAt the handset Press the UP or Down buttonTo de-register a handset from the base Handset is registeredHandset Shows Confirm?To register a handset to a different make of base station Setting 0000 and pressTo see the base station identity NumberTransferring calls Internal callsTo make an internal call to another handset Until Internal Call isDuring a call with an external Three-way conversationCaller Press the buttonRing Priority and press To switch ring priority setting on/offSelect On or Off Replacing the handset batteries HelpNo display appears Telephone problems Possible cause SolutionSolution Telephone problems Possible causeGeneral information GuaranteeSwitchboard external line access code Switchboard compatibilityTechnical information RecallTo Pabx Setup To SetupTo Pabx Display shows PIN Code?Index REN Ringer Equivalence Number TTE Offices worldwide