BT 3200 SMS To register a handset to a different make of base station, Setting 0000 and press

Synergy 3200 SMS user guide ~ 4th Edition ~ 16th October ’02 ~ 4678

To register a handset to a different make of base station

The base must be GAP compatible.

To put the base in registration mode, see the base station user guide.

	At the handset:
u	Press the  button to enter the
en
M
	menu.
Redial	Press the UP or DOWN button
Vol
	to scroll to Registration and
Calls
u	press the  button.
en
M

The display will show BASE 1–4. The numbers that are flashing indicate the other bases that the handset is registered to.

Enter the base number (1-4) that you want to register the handset to.

u
en
M	Press the  button.
	Enter your 4-digit PIN (original
	setting 0000) and press the
enu
M

button.

The display will show Base search 1, 2, 3, 4 and the symbol will flash as the handset tries to locate the base. When the handset locates the base, the handset will be automatically selected and shown on the display.

(If the handset does not locate the base, the handset will return to the previous menu.

Try to register again by using a different base number. Ensure that you are close to the base.)

u	Press the  button to confirm.
en
M
	The handset is registered.

Note

Your 4-digit PIN number is 0000 unless you have already allocated a new PIN number as explained on page 26.

To see the base station identity			ADDITIONAL
number
		This is the individual code	HANDSETS
		Press the  button to enter the
		number of the base.
u
en
M
Redial		menu.
		Press the DOWN button to
Vol
		scroll to Setup and press the
Calls
u		 button.
en
M
Redial		Press the DOWN button to
Vol
		scroll to Base Id.
Calls
u		Press the  button. The identity
en
M
		number is displayed.
Se	y	Press and hold the ✘ button to
cr
	ec

return to standby.

33