Redial, Speaker Listen-Only | Avaya 6402D specs

Redial

The Redial (or Last Number Dialed) feature automatically redials the last extension or outside number you dialed.

To redial the last number that you dialed

1. Press Redial .

The redialed number can be an outside number (up to 24 digits), an extension, or a trunk or feature access code.

Speaker (Listen-Only)

Note: The Speaker feature allows you to place calls or access other features without lifting the handset. However, in order to speak to the other party, you must use the handset.

To place a call without lifting the handset or for any listening-only feature (such as monitoring a call on which you have been put on hold)

1.Press Spkr .

2.Place a call or access the selected feature.

3.Adjust the speaker volume if necessary:

To raise the volume, press the right half of the Volume control button

labeled ; to lower the volume, press the left half of the Volume

control button labeled . If you have a display, it shows the volume level:

->>>>>> +

To change from the speaker to the handset

1. Lift the handset and talk.

To change from the handset to the speaker

1. While the handset is off-hook, press Spkr .

You can now hang up the handset (within 10 seconds) and the call will remain active on the speaker. However, in order to talk to the other party, you must use the handset.

To end a call (while the handset is on-hook and only the speaker is active)

1. With the handset on-hook, press Spkr .