Aastra Telecom VentureIP manual Entering Letters and Characters, Editing text

Editing text

When you need to edit onscreen display text, (for example, to enter a directory list name), use the following guidelines:

To	Do this
enter text at the current	Press the dialpad key with the corresponding
cursor position.	letter on it. Press once for the first letter, twice
	for the second, and three times for the third.
	For example, to type “R”, press the dialpad
	key three times.
move the cursor to the left	Press the 3key.
without deleting.
move the cursor to the right	Press the 4key.
without deleting.
add a space at the	Press the 4key.
end of a line.
move the cursor to the left	Press the backspace softkey.
and delete.
change the case of a character.	Press the ChangeCase softkey.
	Note: The first character in a line, and the first
	character after a space are automatically
	capitalized.

Entering Letters and Characters

You can enter characters using the telephone’s dial pad. To enter a letter, press the key with that letter on it. If the letter is the second one on that key, press the key twice. For example, to enter ‘R’, press 7 three times. The cursor will advance to the next space after a delay of 2 seconds or if you press a different key.

To change the case of a letter, press the ChangeCase softkey, and then enter the letter. By default the first letter of a word or name will be capitalized, and the letters following will be lower case.

Special characters are entered by pressing the 1 and the # keys. Characters will appear in this order:

1: & , ( ) ` . _ - 1. #: # / \ @.

Set Overview

Model VentureIP 480i User Guide 10