Aastra Telecom 2025, A300, A150, 2065, 2045 manual Formulating Functions, Function Commands

Page 69

Personalizing Your Phone

Notes:

The Handset and Hands-freesettings only work when the ringing signal is activated.

If you select answer using Handset or Hands-free, you must also specify the Priority, with 1 being the highest priority, and 8 the lowest:

Priority

Setting the priority:

 

Select the priority you want from 1 to 8 and confirm with the Ok Foxkey.

 

The setting is stored.

Formulating Functions

This section explains how to activate an individual function, for example call forwarding uncondi- tional, with the aid of function commands and how to assign it to a key.

Function Commands

You can use function commands to define a function to suit your personal requirements. A function can consist of one or more function commands, function codes, and the phone number. You can either carry out a function directly or store it under a function key (select con- figurable function).

Tab. 1

The following function commands are available:

 

 

 

"A"

 

Seize line with highest priority

 

 

 

"I"

 

Seize line

 

 

 

"X"

 

Disconnect

 

 

 

"P"

 

Pause 1 second before the next operation

 

 

 

"Lxx"

 

Seize line xx (Line keys)

 

 

 

"N"

 

Use the phone number entered in call preparation

 

 

 

"."

 

Control key function (up-circuit system)

 

 

 

"Z"

 

Activate/deactivate DTMF mode

 

 

 

"R"

 

Use the phone number last dialled

 

 

 

"Y"

 

Disconnect and reseize the line.

 

 

 

69

Image 69
Contents Office 70IP User’s Guide Operating elements Absence key with LED Volume/cursor keysPhone book key RedialkeyOperating and Display Elements Display symbolsSafety Information User informationDisposal About this document Intended PurposeContents Dialling and Phoning You Receive a Call Ending a call in hands-free modeAnswering a Call Ending a CallDialling with the Phone Number You Want to Make a CallDialling with Redial Pick up the handset Phone number displayed is dialledUsing Your Phone in Hands-Free Mode Using Your Phone in Open Listening ModeDuring a call Deactivating open listeningSwitching the microphone off Using a HeadsetSwitching the microphone back on Muting the MicrophoneUsing the Display and Operating Elements Using the Foxkey Display symbols and display textDisplay KeysEnters digits InputEnter the letters Digit keysCorrecting your Input Switching between Upper and Lower CaseMoving the Cursor To delete the last characterMenu-Guided Navigation Accessing the menuNavigating with the navigation key Undoing ActionsResetting activated features SignalsIndicator LED Signals Right LED flashesSupplementary features Dialling by Name Quickdial Making and answering callsScroll to Search entry and press the Select Foxkey Dialling from the phone bookDialling from external phone books Dialling from the Call List of Answered Calls Dialling from the Call List of Unanswered CallsDialling with a Configurable Key Selecting with a preconfigured FoxkeyPress the key once Key’s first allocated function is displayedRequesting a Callback Reset callbackTo answer the callback request Back to the idle stateAnswering Call Waiting Call Waiting on an Internal SubscriberSubscriber is busy Answering the callStarting an Announcement Rejecting the callEnding a current call Private call with PIN Receiving an AnnouncementTo continue the announcement as a phone call To stop the announcementEnquiry Call During a Call Using functions while in a callMaking a Conference Call Connecting with notificationTransferring a Call Partner To connect the call party on holdPress the P Foxkey Connected in hands-free mode Connecting without notificationParking a Call Partner To retrieve a parked call partyWhen you are back at your desk Using the Absence KeyOrganising absences from the desk To activate the last forwarded destinationForwarding Calls Call forwarding Forwarding a Call on No Reply Cfnr Voice Mail Forward to Voice MailForwarding to a message Locking Your Phone Scroll to Settings and press the Select FoxkeyScroll to General and press the Select Foxkey Enter the PIN and confirm with the Ok FoxkeyScroll to Activated features and press the Select Foxkey Using the Team KeyOrganisation Within the Team Unlocking your phoneStarting an Announcement to a Team Partner Substituting for a Team PartnerWhile the Team key is flashing Pick up the handset You hear the dialling toneDeflect a call during the ringing phase Reject a call during the ringing phaseFunctions for special situations Send text messages Picking up a call Read text messagesRead Message To delete the messageResetting Dtmf mode Using the Dtmf Mode. Activating/deactivating DtmfEnter #36 Enter your internal phone number Enter your PIN Making a call on a third-party phoneAnswering a Pager Paging an Internal SubscriberActivating/Deactivating a Discreet ring Answering a General BellIdle state Press the function key for Discreet ringBefore the call Tracing Malicious CallsAnswering a Call on a Line Key Line KeysParking the call and switching lines Switching active linesPhoning over a Line Key Parking a Call Partner on a Line KeyUsing remote control from a third-party phone Setting functions by remote controlPersonalizing Your Phone Setting the display Setting the Ringing Properties AudioSetting the ringing volume during ringing Scroll to Display and press the Select FoxkeySetting the Volume during a Call Setting the Ringing PropertiesScroll to Audio and press the Select Foxkey Hands-free and headset settings Automatic Hands-Free ModeSetting is stored To activate headset operation General settings Configuring the Dtmf modeSelecting the Language Changing the PIN Entering the Display Text for the Idle State Scroll to Protection and press the Select Foxkey ProtectionCreating a New Phone Book Entry Phone Book ManagementModfying or deleting a phone book entry To change an entryTo delete an entry Personal greeting Configuring Voice MailRecording a greeting Listening to the greetingAvailable keys Configuring KeysStoring a Phone Number under a Key Number Key Display shows choice of key typesStoring a Function under a Key Function Key Display shows the function currently set Scroll to Function key and press the Select FoxkeySelect the function you want and press the Select Foxkey Stored under the keyFoxkey You can listen to each setting using the Test Foxkey Team key can only be allocated to a configurable keySetting the answering mode Storing a Team Partner under a Key Team KeyTo clear a configurable key Setting the priorityClearing a Key Display shows the key typeSetting the Response of a Line Key Configuring Line KeysPress the Line key you want and hold it down for a moment Personal key is also treated as a line keyFormulating Functions Function CommandsIP settings Local settingsFurther information Malfunctions TroubleshootingLiability Declaration Open Source SoftwareAbout Open Source Software DisclaimerOperation Options Equipment providedSetting the phone up as a desktop phone Setting up and mounting the phoneWall mounting Connecting the phone DismantlingConnections Connecting your PC to the LAN Connecting your phone to the LANConnecting the power supply Only use the optional original plug-in power adapterOffice KBM expansion keypad option Connecting the Office KBM expansion keypadLabelling Configurable Keys Absence key IndexIntended Purpose Index Declaration of Conformity

A150, 2025, 2045, A300, 2065 specifications

Aastra Telecom is known for its reliable and efficient business communication systems, and its range of telephones, including the Aastra 2065, A300, 2045, 2025, and A150, stands out in the industry. These models cater to various business needs, from small enterprises to larger corporations, offering a comprehensive set of features while ensuring user-friendly operations.

The Aastra 2065 is a versatile desktop phone designed for professional environments. It features a large, easy-to-read display and provides a variety of programmable keys for customizable functions. The phone supports advanced telephony technologies, including VoIP, enabling seamless connectivity and clear voice communication. One of its standout features is its wideband audio capability, which enhances call quality, making conversations more natural.

The A300 model is geared towards businesses seeking a robust and feature-rich solution. It supports multiple lines, making it suitable for users who handle numerous calls simultaneously. The A300 integrates advanced call management features, such as caller ID and call forwarding, and it provides hands-free operation via a built-in speakerphone. Its sleek design fits well in modern office settings, ensuring aesthetic appeal alongside functionality.

Moving on to the Aastra 2045, this model is ideal for teams that require efficiency and quick access to essential features. It includes a backlit display for easy readability even in low-light conditions. The 2045 supports a comprehensive set of office applications, allowing integration with customer relationship management tools. Additionally, its recording capabilities assist in quality assurance and training.

The Aastra 2025 is another excellent option, particularly for users who value simplicity combined with advanced features. It offers programmable keys for one-touch access to frequently used functions. The 2025 supports headset connectivity, providing flexibility for users who need to maintain hands-free communication while multitasking.

Lastly, the Aastra A150 is an entry-level option that combines affordability with essential features. Despite its lower price point, the A150 includes a straightforward user interface, making it perfect for smaller businesses or those just starting to implement telecommunication systems. The phone supports basic VoIP functionality, ensuring that businesses can communicate effectively without significant investment.

Overall, Aastra Telecom continues to lead with innovative features, advanced technologies, and a user-centric approach across its product lineup, making their telephones an optimal choice for any business environment.