SkyLink ML-100, ML-001 manual Installation Accessories

Page 10

INSTALLATION

ACCESSORIES

4.Insert the rechargeable battery to the battery compartment. different types of rechargeable battery for 2 markets:

a. North American Version: Lead Acid Connect the 2 wires to the battery. Red wire connects to the “+” terminal on the battery. Black wire connects to the “-” terminal on the battery. Markings on the battery should face up.

b. European Version: Ni-MH

Plug in the wire from the battery to the battery socket inside the battery compartment.

5. After inserting the rechargeable battery, the LO BATT LED will be off if the battery is fully charged, otherwise it will be on.

6. Connect the phone line from the wall socket to the “LINE” socket inside the battery compartment.

7.[OPTIONAL] If another telephone that will be using the same telephone jack, you may connect this telephone to “PHONE” outlet of the control panel by a phone cord (not provided).

8.The phone line(s), cord of the power adapter should all come out from the lower right corner of

the control panel in order to close the battery cover properly.

9. The battery cover can now be closed, and tighten the 2 screws to secure the battery cover.

PWR, ARM, PROG LEDs should be flashing, zone LEDs should be off.

10.The control panel is intended to be mounted on a flat wall. 2 screws are required to mount the control panel securely on the wall. It should not be mounted

too high or too low. In most situations, just below eye level is ideal.

11. Once you have selected the mounting location, tighten 2 screws on the wall. They should be 7-1/8" apart from each other, on the same horizontal level. Do not tighten the screws

all the way in, leave about 1/8" from the wall in order for the control panel to be

There are 2

(Optional)

7-1/8"

Additional sensors and transmitters as well as add on accessories are available to work with your system.

Door/Window Sensor (WD-101)

-Magnetic Contact Sensor

-For all doors or windows

- Batteries included

Repeater (RP-434)

- Extend the operation range between 2 wireless devices, such as any sensors and control panel

- Doubles the operation range automatically between sensors and control panel

Water Sensor (FS-101)

- Alerts you when water is detected

- Ideal for water detection in basement, under the sink, even bathroom

Garage Door MonitorTM Sensor (GS-101)

(Available in US and Canada) - Monitors your garage door

- Alerts you when the garage door is left open

Garage Door MonitorTM Sensor (GS-102)

(Available outside US and Canada) - Monitors your garage door

- Alerts you when the garage door is left open

Indoor/Outdoor Motion Sensor (PS-101)

- Monitors area in a 110 degree ARC and up to 40 feet away from the sensor

hanged onto the wall.

8

49

Image 10
Contents Fax 905 Sheard Avenue, Brampton, Ontario, Canada L6Y 1J3 Tel 905Email support@skylinkhome.com Home Smart Center Important Safety Instructions Declaration of Conformity EMCOperation ContentSystem Configuration Disarming a triggered control panelOverview IntroductionFCC Information Consumer Information System Configuration Control Module SW-101U UK, SW-101F French, SW-101G German AccessoriesControl Module SW-100 Emergency Dialer AD-433SInstallation Installing the ConsoleInstallation Accessories Changing Passwords Trouble Shooting InstallationProgramming Passwords Order to change the password, follow the procedures belowPhone Number Programming Installation Trouble ShootingSolutions Control PanelTesting Phone Numbers Home AutomationContact ID Phone number Event TriggerAccount Number Programming Table F Zone LED status for erasing control moduleOperation Deactivating the Digital DialerErase Control Modules Testing Installing Door / Window SensorsPart 2 Learn signal from Control Panel to Control Module Mounting the SensorPart 1 Learn signal from Control Module to Control Panel Installing Motion SensorInsert Battery Table E Zone LED status for learning control moduleControl module command signal Learn Control ModulesAdvanced Programming Alert ModeOperation Erase SensorsLearn Sensors Continue MuteTable C Arming the System System StatusLearn Sensors Before the siren sounds Erase Keychain / Keypad RemotesDisarming the system System is now armedDisarming a triggered control panel Learn Keychain / Keypad RemotesDisarming under Duress System Failure To enable alert zone feature, follow the instructions belowPanic Phone Line FailureSensor Failure Low BatteryIt is recommend to enable alert zone if Control PanelTo enable auto mute feature, follow the instructions below Auto MuteReceiving the Emergency Call CommunicationExample System Armed Alarm Mode To access the control panel away from homeCalling in when you are away from home Remote Operation by TelephoneSystem Disarmed Alert Mode Beep / AlarmRemote Phone Operations

ML-001, ML-100 specifications

The SkyLink ML-100 and ML-001 are innovative products in the realm of machine learning and artificial intelligence, designed to simplify the process of deploying and managing machine learning models in various applications. As devices that cater to developers and businesses alike, they bring cutting-edge technologies to the forefront, ensuring a seamless experience for users looking to utilize machine learning effectively.

The SkyLink ML-100 is specifically engineered to provide high-performance capabilities in a compact form factor. One of its main features is the advanced processing unit, which leverages state-of-the-art neural network architectures. This allows the device to handle complex algorithms and process large datasets efficiently. Additionally, the ML-100 is equipped with robust connectivity options, including Wi-Fi, Bluetooth, and support for various IoT protocols, making it an ideal choice for applications in smart homes, industrial automation, and beyond.

On the other hand, the SkyLink ML-001 serves as a versatile platform for developers who wish to train and deploy their machine-learning models. It is designed with a user-friendly interface that supports easy integration with popular programming languages such as Python and R. The ML-001 also boasts an extensive library of pre-built models and algorithms, enabling users to accelerate their development processes. Furthermore, the device comes with advanced data analytics features, providing insightful reports and visualizations that help users understand their model performances better.

Both devices prioritize energy efficiency, ensuring that they can run demanding models without excessive power consumption. They feature adaptive cooling technologies to maintain optimal operating conditions, thereby prolonging device lifespan and enhancing performance stability.

SkyLink incorporates robust security measures into both models, protecting sensitive data and ensuring secure communications. With end-to-end encryption and secure access controls, businesses can rest assured that their data remains confidential.

In conclusion, the SkyLink ML-100 and ML-001 represent significant advancements in machine learning technologies, offering a unique blend of performance, versatility, and security. Whether targeting developers seeking a platform for model deployment or businesses looking for powerful, connected devices, these products stand out in the competitive landscape, providing the tools necessary to harness the full potential of machine learning.