SkyLink ML-100, ML-001 manual Operation, Advanced Programming, Alert Mode, Erase Sensors

Page 20

OPERATION

The Control Panel is always in one of the 2 operating modes:

ADVANCED PROGRAMMING

1.Alert Mode - When the system is not armed (ARM LED off), it is in alert mode.

2.Alarm Mode - When the system is armed (ARM LED on), it is in alarm mode.

Alert Mode

The Control Panel will be in alert mode automatically if the system is not armed. Alert mode allows users inside the premises to know what sensor is triggered. It is intended to be used when someone stays inside the premises.

In alert mode, the control panel will give you notification of the triggered sensor(s) by voice announcement, unique beeping and LED flashing.

 

SENSOR 1

SENSOR 2

Zone 1

Button [1]

Button [6]

Zone 2

Button [2]

Button [7]

Zone 3

Button [3]

Button [8]

Zone 4

Button [4]

Button [9]

Zone 5

Button [5]

Button [0]

®

This row : Buttons for Sensor 1

Zone LED : Flash once

This row : Buttons for Sensor 2

Zone LED : Flash twice

1

Number of beeps

Zone of the triggered sensor

2

Number of flashes of zone LED

Sensor number of the triggered sensor

3

Voice announcement

Tells you the zone and locations of

 

 

the triggered sensor by human voice.

Note:

-Each zone can program up to 2 sensors. There are 5 zones, so up to 10 sensors can be programmed to the control panel. Please refer to page 37, "Sensor Location Selection Guide" for detail information.

Erase Sensors

Proceed to the following to erase a sensor.

Step

Keys

Function

Description

 

Note

1

[PROG]

Enter

Enter master

3

beeps for valid password.

 

[MPIN]

Programming

password to

1

long beep for invalid

 

 

mode

programming mode password.

Alert Mode Examples (Door/Window sensor sold separately)

2

[9]

Select erase

After [9] is entered, some

Zone 1 Sensor 1 door open

Zone 3 Sensor 2 window open

1.

Zone 1

3. Single flash

 

 

Sensor 1

 

 

Triggered

 

2.

 

 

Beep___Beep___

 

Beep___Beep

 

1.

Zone 3

3. Double flash

 

Sensor 2

 

 

Triggered

 

 

 

remote

 

 

 

programming

 

3

To erase an

Select the

Refer to the table

 

occupied

sensor you

below to select the

 

sensor, press

would like to

remote location.

 

[1] to [0].

erase

 

zone LEDs will flash or stay off. The zone LEDs represent whether that zone is occupied by any sensor. **See Table D below.

After you have selected the sensor, you will hear 3 beeps and verbal confirmation

[Zone X Sensor Y Empty Memory], where X and Y are the zone and sensor numbers you have selected.

2. Beep Beep Beep___ Beep Beep Beep___

ZONE LED

DESCRIPTION

Off

Zone is not occupied by any sensor

Flashes once

This zone is occupied by sensor 1.

Flashes twice

This zone is occupied by sensor 2.

Note:

-For Door / Window sensor, alert notification (beeping and LED flashing) will continue until the sensor is in closed position, i.e. closing the window or door.

-For Motion Sensor, the alert notification (beeping and LED flashing) will last for 20

seconds for every detected movement.

18

Flashes once,

This zone is occupied by sensors 1 and 2.

then twice

 

**Table D: Zone LED status for erasing sensors.

39

Image 20
Contents Email support@skylinkhome.com Sheard Avenue, Brampton, Ontario, Canada L6Y 1J3 Tel 905Fax 905 Home Smart Center Important Safety Instructions Declaration of Conformity EMCContent System ConfigurationOperation Disarming a triggered control panelFCC Information Consumer Information IntroductionOverview System Configuration Accessories Control Module SW-100Control Module SW-101U UK, SW-101F French, SW-101G German Emergency Dialer AD-433SInstallation Installing the ConsoleInstallation Accessories Trouble Shooting Installation Programming PasswordsChanging Passwords Order to change the password, follow the procedures belowInstallation Trouble Shooting SolutionsPhone Number Programming Control PanelTesting Phone Numbers Home AutomationContact ID Phone number Event TriggerAccount Number Programming Table F Zone LED status for erasing control moduleErase Control Modules Deactivating the Digital DialerOperation Installing Door / Window Sensors Part 2 Learn signal from Control Panel to Control ModuleTesting Mounting the SensorInstalling Motion Sensor Insert BatteryPart 1 Learn signal from Control Module to Control Panel Table E Zone LED status for learning control moduleControl module command signal Learn Control ModulesAlert Mode OperationAdvanced Programming Erase SensorsTable C MuteLearn Sensors Continue Learn Sensors System StatusArming the System Erase Keychain / Keypad Remotes Disarming the systemBefore the siren sounds System is now armedDisarming under Duress Learn Keychain / Keypad RemotesDisarming a triggered control panel To enable alert zone feature, follow the instructions below PanicSystem Failure Phone Line FailureLow Battery It is recommend to enable alert zone ifSensor Failure Control PanelTo enable auto mute feature, follow the instructions below Auto MuteExample CommunicationReceiving the Emergency Call To access the control panel away from home Calling in when you are away from homeSystem Armed Alarm Mode Remote Operation by TelephoneRemote Phone Operations Beep / AlarmSystem Disarmed Alert Mode

ML-001, ML-100 specifications

The SkyLink ML-100 and ML-001 are innovative products in the realm of machine learning and artificial intelligence, designed to simplify the process of deploying and managing machine learning models in various applications. As devices that cater to developers and businesses alike, they bring cutting-edge technologies to the forefront, ensuring a seamless experience for users looking to utilize machine learning effectively.

The SkyLink ML-100 is specifically engineered to provide high-performance capabilities in a compact form factor. One of its main features is the advanced processing unit, which leverages state-of-the-art neural network architectures. This allows the device to handle complex algorithms and process large datasets efficiently. Additionally, the ML-100 is equipped with robust connectivity options, including Wi-Fi, Bluetooth, and support for various IoT protocols, making it an ideal choice for applications in smart homes, industrial automation, and beyond.

On the other hand, the SkyLink ML-001 serves as a versatile platform for developers who wish to train and deploy their machine-learning models. It is designed with a user-friendly interface that supports easy integration with popular programming languages such as Python and R. The ML-001 also boasts an extensive library of pre-built models and algorithms, enabling users to accelerate their development processes. Furthermore, the device comes with advanced data analytics features, providing insightful reports and visualizations that help users understand their model performances better.

Both devices prioritize energy efficiency, ensuring that they can run demanding models without excessive power consumption. They feature adaptive cooling technologies to maintain optimal operating conditions, thereby prolonging device lifespan and enhancing performance stability.

SkyLink incorporates robust security measures into both models, protecting sensitive data and ensuring secure communications. With end-to-end encryption and secure access controls, businesses can rest assured that their data remains confidential.

In conclusion, the SkyLink ML-100 and ML-001 represent significant advancements in machine learning technologies, offering a unique blend of performance, versatility, and security. Whether targeting developers seeking a platform for model deployment or businesses looking for powerful, connected devices, these products stand out in the competitive landscape, providing the tools necessary to harness the full potential of machine learning.