SkyLink ML-100, ML-001 manual Contact ID Phone number, Event Trigger

Page 14

INSTALLATION

Contact ID Phone number

You can program a telephone number for calling to the central monitoring station. When the system is in panic, the control panel will call this phone number and will send out a Contact ID message with event code 140, which represents “General Alarm”.

HOME AUTOMATION

Event Trigger

You can control up to 5 different devices not only manually, but also automatically. It is called Event Trigger. That means when a sensor is triggered, the control panel will transmit a signal to activate the designated control module. Applications include:

Follow the instructions below to program the necessary info in order to call a monitoring station:

-Phone number of central monitoring station (up to 29 digits)

-Account number given by the Central Monitoring Station

Phone Number Programming (Calling to Central Monitoring Station)

-Lights on when you open the front door (walking into a room, lights on automatically), this is called "Event Trigger on".

-Lights off when you open a door. (walk away from a room, turns lights off), this is called "Event Triggered off".

Event trigger is only applicable to the sensor(s) and control module in the same zone. For

Event Trigger On

Step

Keys

Function

Description

1

Press [PROG]

Enter Program-

Enter master

 

Press [MPIN]

ming mode

password to

 

 

 

programming mode

2

Press [1]

Select phone

 

 

number

 

 

 

 

 

 

programming

 

Note

3 beeps for valid password. 1 long beep for invalid password.

You will hear

[Enter Phone Memory]

example, you can program control module 1 to be on or off when zone 1 sensor(s) is triggered. You can also program control module 2 to be on / off when zone 2 sensor(s) is triggered.

Factory Default: This feature is disabled for all zones at the factory.

Event Trigger Off

3

Press [0]

Enter phone

During emergency,

 

 

memory

the Contact ID phone

 

 

 

number has the highest

 

 

 

priority, it will be the

 

 

 

first number to call.

You will hear

[Phone Zero]

To change the event trigger setting follow the instructions below.

Step

Keys

Function

Description

Note

1

[PROG]

Enter Program-

Enter master

3 beeps for valid

ming mode

password to

password. 1 long beep

 

[MPIN]

 

 

programming

for invalid password.

 

 

 

 

 

 

mode

 

4

Enter [Phone

Enter phone

Phone number

You will hear

 

number] +

number

can be up to 29

[Phone Accepted]

 

[Arm]

 

digits.

indicating the phone

 

 

 

 

number has been

programmed successfully.

2

[7]

Select Event

After [7] is entered,

 

 

Trigger

some zone LEDs will be

off, on or flash. This indicates the setting of event trigger.

3

Disable Event

Select which

Refer to the

 

Trigger: [1] to

zone you would

diagram below

 

[5]

like to enable /

to select the

 

 

disable event

appropriate

 

Enable Event

trigger.

setting.

 

 

 

Trigger: [6] to [0].

If event trigger “ON” is enabled, that zone LED will be on. If event trigger “OFF” is enabled, that zone LED will flash. If it is disabled, the zone LED will be off. You are allowed to make multiple changes before terminating programming mode.

4

[PROG]

Terminate

PROG LED

 

when

programming

will be off.

 

finished.

mode.

 

–12–

–45–

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Email support@skylinkhome.com Sheard Avenue, Brampton, Ontario, Canada L6Y 1J3 Tel 905Fax 905 Home Smart Center Important Safety Instructions Declaration of Conformity EMCOperation ContentSystem Configuration Disarming a triggered control panelFCC Information Consumer Information IntroductionOverview System Configuration Control Module SW-101U UK, SW-101F French, SW-101G German AccessoriesControl Module SW-100 Emergency Dialer AD-433SInstallation Installing the ConsoleInstallation Accessories Changing Passwords Trouble Shooting InstallationProgramming Passwords Order to change the password, follow the procedures belowPhone Number Programming Installation Trouble ShootingSolutions Control PanelTesting Phone Numbers Home AutomationContact ID Phone number Event TriggerAccount Number Programming Table F Zone LED status for erasing control moduleErase Control Modules Deactivating the Digital DialerOperation Testing Installing Door / Window SensorsPart 2 Learn signal from Control Panel to Control Module Mounting the SensorPart 1 Learn signal from Control Module to Control Panel Installing Motion SensorInsert Battery Table E Zone LED status for learning control moduleControl module command signal Learn Control ModulesAdvanced Programming Alert ModeOperation Erase SensorsTable C MuteLearn Sensors Continue Learn Sensors System StatusArming the System Before the siren sounds Erase Keychain / Keypad RemotesDisarming the system System is now armedDisarming under Duress Learn Keychain / Keypad RemotesDisarming a triggered control panel System Failure To enable alert zone feature, follow the instructions belowPanic Phone Line FailureSensor Failure Low BatteryIt is recommend to enable alert zone if Control PanelTo enable auto mute feature, follow the instructions below Auto MuteExample CommunicationReceiving the Emergency Call System Armed Alarm Mode To access the control panel away from homeCalling in when you are away from home Remote Operation by TelephoneRemote Phone Operations Beep / AlarmSystem Disarmed Alert Mode

ML-001, ML-100 specifications

The SkyLink ML-100 and ML-001 are innovative products in the realm of machine learning and artificial intelligence, designed to simplify the process of deploying and managing machine learning models in various applications. As devices that cater to developers and businesses alike, they bring cutting-edge technologies to the forefront, ensuring a seamless experience for users looking to utilize machine learning effectively.

The SkyLink ML-100 is specifically engineered to provide high-performance capabilities in a compact form factor. One of its main features is the advanced processing unit, which leverages state-of-the-art neural network architectures. This allows the device to handle complex algorithms and process large datasets efficiently. Additionally, the ML-100 is equipped with robust connectivity options, including Wi-Fi, Bluetooth, and support for various IoT protocols, making it an ideal choice for applications in smart homes, industrial automation, and beyond.

On the other hand, the SkyLink ML-001 serves as a versatile platform for developers who wish to train and deploy their machine-learning models. It is designed with a user-friendly interface that supports easy integration with popular programming languages such as Python and R. The ML-001 also boasts an extensive library of pre-built models and algorithms, enabling users to accelerate their development processes. Furthermore, the device comes with advanced data analytics features, providing insightful reports and visualizations that help users understand their model performances better.

Both devices prioritize energy efficiency, ensuring that they can run demanding models without excessive power consumption. They feature adaptive cooling technologies to maintain optimal operating conditions, thereby prolonging device lifespan and enhancing performance stability.

SkyLink incorporates robust security measures into both models, protecting sensitive data and ensuring secure communications. With end-to-end encryption and secure access controls, businesses can rest assured that their data remains confidential.

In conclusion, the SkyLink ML-100 and ML-001 represent significant advancements in machine learning technologies, offering a unique blend of performance, versatility, and security. Whether targeting developers seeking a platform for model deployment or businesses looking for powerful, connected devices, these products stand out in the competitive landscape, providing the tools necessary to harness the full potential of machine learning.
Top Page Image Contents