SkyLink ML-100, ML-001 manual Beep / Alarm, Remote Phone Operations, System Disarmed Alert Mode

Page 30

COMMUNICATION

Table 1: Remote Phone Operations

SYSTEM OPERATION

PHONE COMMAND

DESCRIPTION

Turn on device x

x+[*]

Turn devices on will hear [Device X On]. When the

[x] = 1 to 5

 

control module receives the on signal, it will turn on the

 

 

plugged in device, and send a confirmation back to the

 

 

control panel. You will then hear [Device On Accepted].

Turn off device x

x+[#]

Turn devices off will hear [Device X Off]. When the

x = [1 to 5]

 

control module receives the off signal, it will turn off the

 

 

plugged in device, and send a confirmation back to the

 

 

control panel. You will then hear [Device Off Accepted].

Check system status

[8]+[#]

You will hear system status announcement

Arm

[7]+[#]

You will hear [System Armed]

Disarm

[9]+[#]

You will hear [System Disarmed]

Disconnect

[0]+[#]

Phone line disconnect

ADVANCED PROGRAMMING

Advanced Programming allows users to customize the control panel to react differently under different conditions. Features such as:

-When a sensor is triggered, the control panel can beep or alarm

-Beeping can be terminated automatically after a fixed period of time for some sensors

-Some sensors can be programmed to beep only, never alarm

-When a door is open, turn lights on

-Program additional sensors and remotes

Programming Summary

COMMAND

DESCRIPTION

[PROG] + [1]

Program Phone Numbers

[PROG] + [2]

Program Password

[PROG] + [3]

Learn Sensors

[PROG] + [4]

Learn Keychain or Keypad Transmitters / Control Modules

[PROG] + [5]

Beep / Alarm Setting

[PROG] + [6]

Auto Mute Setting

[PROG] + [7]

Event Trigger Setting

[PROG] + [8]

Alert Zone (Bypass) Setting

[PROG] + [9]

Erase Sensors

[PROG] + [0]

Erase Keychain or Keypad Transmitters / Control Modules

Follow the instructions below to have access to Advanced Programming.

Beep / Alarm

User can customize the audio warning so that when a sensor is triggered, the control panel may beep or alarm may sound instantly. Depending on whether the control panel is armed or disarmed, the audio warning is different.

System Disarmed (Alert Mode)

If a zone is set to “Beep”, the control panel will beep when a sensor is triggered, until the sensor is deactivated. Motion Sensor will beep for 20 seconds for every detected movement.

If a zone is set to “Alarm”, alarm will sound instantly when a sensor is triggered. Alarm will stop when the sensor is deactivated, or reaches a 3-minute time out period.

28

29

Image 30
Contents Sheard Avenue, Brampton, Ontario, Canada L6Y 1J3 Tel 905 Fax 905Email support@skylinkhome.com Home Smart Center Important Safety Instructions Declaration of Conformity EMCOperation ContentSystem Configuration Disarming a triggered control panelIntroduction OverviewFCC Information Consumer Information System Configuration Control Module SW-101U UK, SW-101F French, SW-101G German AccessoriesControl Module SW-100 Emergency Dialer AD-433SInstallation Installing the ConsoleInstallation Accessories Changing Passwords Trouble Shooting InstallationProgramming Passwords Order to change the password, follow the procedures belowPhone Number Programming Installation Trouble ShootingSolutions Control PanelTesting Phone Numbers Home AutomationContact ID Phone number Event TriggerAccount Number Programming Table F Zone LED status for erasing control moduleDeactivating the Digital Dialer OperationErase Control Modules Testing Installing Door / Window SensorsPart 2 Learn signal from Control Panel to Control Module Mounting the SensorPart 1 Learn signal from Control Module to Control Panel Installing Motion SensorInsert Battery Table E Zone LED status for learning control moduleControl module command signal Learn Control ModulesAdvanced Programming Alert ModeOperation Erase SensorsMute Learn Sensors ContinueTable C System Status Arming the SystemLearn Sensors Before the siren sounds Erase Keychain / Keypad RemotesDisarming the system System is now armedLearn Keychain / Keypad Remotes Disarming a triggered control panelDisarming under Duress System Failure To enable alert zone feature, follow the instructions belowPanic Phone Line FailureSensor Failure Low BatteryIt is recommend to enable alert zone if Control PanelTo enable auto mute feature, follow the instructions below Auto MuteCommunication Receiving the Emergency CallExample System Armed Alarm Mode To access the control panel away from homeCalling in when you are away from home Remote Operation by TelephoneBeep / Alarm System Disarmed Alert ModeRemote Phone Operations

ML-001, ML-100 specifications

The SkyLink ML-100 and ML-001 are innovative products in the realm of machine learning and artificial intelligence, designed to simplify the process of deploying and managing machine learning models in various applications. As devices that cater to developers and businesses alike, they bring cutting-edge technologies to the forefront, ensuring a seamless experience for users looking to utilize machine learning effectively.

The SkyLink ML-100 is specifically engineered to provide high-performance capabilities in a compact form factor. One of its main features is the advanced processing unit, which leverages state-of-the-art neural network architectures. This allows the device to handle complex algorithms and process large datasets efficiently. Additionally, the ML-100 is equipped with robust connectivity options, including Wi-Fi, Bluetooth, and support for various IoT protocols, making it an ideal choice for applications in smart homes, industrial automation, and beyond.

On the other hand, the SkyLink ML-001 serves as a versatile platform for developers who wish to train and deploy their machine-learning models. It is designed with a user-friendly interface that supports easy integration with popular programming languages such as Python and R. The ML-001 also boasts an extensive library of pre-built models and algorithms, enabling users to accelerate their development processes. Furthermore, the device comes with advanced data analytics features, providing insightful reports and visualizations that help users understand their model performances better.

Both devices prioritize energy efficiency, ensuring that they can run demanding models without excessive power consumption. They feature adaptive cooling technologies to maintain optimal operating conditions, thereby prolonging device lifespan and enhancing performance stability.

SkyLink incorporates robust security measures into both models, protecting sensitive data and ensuring secure communications. With end-to-end encryption and secure access controls, businesses can rest assured that their data remains confidential.

In conclusion, the SkyLink ML-100 and ML-001 represent significant advancements in machine learning technologies, offering a unique blend of performance, versatility, and security. Whether targeting developers seeking a platform for model deployment or businesses looking for powerful, connected devices, these products stand out in the competitive landscape, providing the tools necessary to harness the full potential of machine learning.