Key Character
j k l 5 K L 5
m n o 6 M N O 6 p q r s 7 P Q R S 7 t u v 8 T U V 8
w x y z 9 W X Y Z 9 0
Short press (active in lower case mode only): to swap the next letter from upper to lower case.
Long press: to swap all next letters between upper or lower case. Short press: to enter a space.
Long press gives access to special characters.
() % ! ; " _ @ § +
# * / & = < > ~ ¥
$¡ ¿ \
Short press moves the cursor through the text one place to the left or to the right. Long press moves the cursor to the text beginning or end. Swap between Multitap/ Multipress method and T9 text input
To enter text press the key bearing the required character until it ap- pears in the display. Holding the key displays the number corre- sponding to the key. If you need to use two characters from the same key wait for a few seconds after typing the first character (until the key characters on the upper part of the screen are cleared) or press before press- ing the key again.
Correct mistakes by a short press on Clear 
.
Holding this key deletes all the text.
Use or to move the cursor in the text. Holding 
allows ac- cess to 25 special characters:
To select and insert a character into the text:
1Move the cursor to the required character (using the 
, 
, 
and 
keys).
2Select OK 
.
Example:
To type Card,
•Press 
and select Messages.
•Select Write new.
•Fill in the To field (see Sending a new SMS message, page 23).
•In the Text field press and hold
until 
is displayed. Press
briefly three times, C is dis- played.
•Wait for the 
key available characters (upper part of the display) to disappear, then
press and hold 
until 
is displayed. Press 
once, a is displayed.
•Press 
three times, r is dis- played.
• Press once, d is displayed. The word Card is now disp- played.
T9 (
) text entry
A press on | allows swapping |
between T9 text entry and the Multitap method.
22