WAP™
Your mobile allows WAP™(Wireless Appli- cation Protocol) connections to access op- erator and/or provided services (e.g. news, sports, weather, travel buying, etc.).
To get a WAP™ connection please make sure:
•your SIM card bears a Data sub- scription
•all parameters are stored into the mobile. These parameters may have been set by your operator. If not you have to enter them man- ually.
Please contact your service provider to check these elements and get the detailed list of parameters to be entered.
Storing the connection set- tings
The current date and time must be set be- fore you enter any WAP™ connection set- ting (see ’Setting the Date and Time’ on the ’Getting started with your One Touch™ 531 booklet).
The profile list can contain up to 10 WAP™ profiles. A profile is a WAP™ connection list of parameters. Each profile allows ac- cess to a specific WAP™ gateway.
To enter and store the profile details via the Assistant
1Press . Select WAP™.
2Select WAP™ profiles .
3 Choose an empty profile ([...]) by selecting Assist .
The Assistant feature allows easy entering of the WAP™ parameters to access WAP™ servers. It displays the fields to be filled in one after another.
To enter and store the profile
4Enter each parameter and vali- date by selecting OK . There are 6 screen levels to be filled in. The requested infor- mation depends on connec- tion type.
If you want to set a WAP™ (circuit) connection, please fill in the following fields:
1/6 Profile name
2/6 Gateway IP Address 3/6 Home page (URL address): select List to get
and select one of the available home page addresses or the
http:// and https:// root addresses.
Select Circuit connection .
4/6 Phone number
5/6 Login (Identification) 6/6 Password (for access control)
If you want to set a GPRS con- nection, please fill in
the following fields:
1/6 Profile name,
2/6 Gateway IP Address, 3/6 Home page (URL address)
Select Packets .
4/6 Access point name 5/6 Login (identification) 6/6 Password (for access control)
details in standard mode
You can only register profile details via the standard mode if you have previously reg- istered profiles in the Connection manager menu (see Connection manager, page 51):
1Press . Select WAP™.
2Select WAP™ profiles .
3Choose an empty profile ([...]) by selecting OK .
4Enter the profile name and select OK .
5Select Settings .
54