Other site
When this option is selected in the WAP™ menu you can enter a known WAP™ address or Bango address site and then go to this site directly from dial up. However unlike the Bookmark feature, ad- dresses are not stored and must be entered each time this feature is used.
Receiving push messages
A push message is a message sent via a service/WAP™ provider. Push messages can bear promotional or general information (e.g.: weather forecast). To view the re- lated information you need to connect to the WAP™ server.
The push messages are displayed on the mobile and/or stored in the Push Inbox, according to the Push settings. At the end of the trans- mission the push reception ses- sion is ended.
The Push Inbox allows to consult and delete the stored messages but also to launch the connection to related server to retrieve the in- formation.
When the Push Inbox contains new message(s), an information message is displayed in the stand- by display with a direct access to the inbox.
To set the push reception param- eters:
1Press . Select WAP™.
2 Select Settings .
3 Select Push preferences
and set the different parameters :
1/ Accept push info: Never: to forbid push mes- sages reception.
Current profile: to allow only push messages from the current WAP™ profile.
All profiles: only allows push messages from the config- ured WAP™ profiles.
Always: no filtering, allows reception of all push mes- sages.
2/ Push
3/ Push quiet mode: on/off: push message infor- mation displayed/not dis- played on push message reception.
4/ Accept provisioning: see information above about Accept push info. To allow, forbid or filter messages bear- ing connection details to con- nect to WAP™ sites.
To consult a push message in the Push inbox:
1Press . Select WAP™.
2Select Push inbox . Sum- maries of all push messages are displayed according to their reception date and time.
3Press Options then select Read text to display the selected message text in full screen mode.
The following options may also be available:
58