Balance information (subscrip- tion dependent)
This service may be supplied by your service provider. It allows to get the remaining airtime balance on your phone line.
Please contact your service pro- vider for more information. If your subscription allows access to this information:
1Press . Select Calls & Times.
2Select Call timers .
3 Select Balance informa- tion.
4 Select Call or Set number
.
When selecting Call, if the bal- ance information number
is already stored, a call is sent to the balance information centre. If no number is stored select Set number and type it in. Press OK to store the number, then select Call to call the information centre number.
Reminder - Call duration
You can set a duration reminder to regularly beep to remind you of the time spent on your call. The occurence can be any multiple of 1 minute (up to 59 mins).
1Press . Select Calls & Times.
2Select Call timers .
3 Select Reminder .
4Select On to activate the Call timer.
5Type the call timer interval (e.g.: 2 = a beep is played every 2 minutes while in con- versation).
6Press OK to validate the entry.
Call timer - reset
This feature allows to reset the call timers. The 4 digit lock code is needed to reset the call timers (default lock code: '0000').
1Press . Select Calls & Times.
2Select Call timers .
3 Select Reset .
4 Select Yes .
5Enter the phone lock code and press OK .
Call costs - management
Some service providers offer an Advice of Charge (AoC) subscrip- tion service allowing to get the last call cost, the total calls cost and the remaining balance on your account (after you have set a 'credit limit' ).
To display these you first have to set a currency value and to enter an average cost per unit (only calls units are displayed if the cost information is not stored).
To set a currency value per unit:
1Press . Select Calls & Times.
2Select Call costs .
3Select Display cost type .
4Select Currency . The cur- rent currency unit value is dis- played.
5Select Modify . Enter your PIN 2 code and press OK .
6Enter the currency name (up to 4 letters). Press OK to validate.
28