Furuno FM-3000 manual Basic Operation, Channel Selection, Channel 9 Call channel

2. Basic Operation

2.1 Channel Selection

2.1.1 Channel 16

Channel 16 is the distress and safety channel. It is used for establishing initial contact with another station and for emer- gency communications. Channel 16 is monitored during both Dualwatch and Tri-watch. While standing by, you must moni- tor Channel 16.

➥Push [16] ( 9 ) momentarily to select Channel 16.

➥Push [CH/WX] to return to the condition before selecting Channel 16, or rotate [CHANNEL] to select operating channel.

INT

25W

Push TAG

CALLING

2.1.2 Channel 9 (Call channel)

Each regular channel group has a separate leisure-use call channel. Call channel is monitored during Tri-watch. Call channels can be programmed (p. 8) and are used to store your most often used channels in each channel group for quick recall.

➥Push [16] ( 9 ) for 1 sec. to select call channel of the se- lected channel group.

•“CALL” and call channel number appear.

•Each channel group may have an independent call channel after programming a call channel.

➥Push [CH/WX] to return to the condition before selecting call channel, or rotate [CHANNEL] to select an operating channel.

		INT
Push for	25W	CALL
1 sec.	TAG
	CALLING

Convenient: Using microphone

➥Push [16/9] momentarily to select Channel 16.

➥Push [16/9] for 1 sec. to select call channel.

➥Push [Y]/[Z] to select any other operating channel.

5