Furuno FM-3000 manual Optional Voice Scrambler Operation, Activating the Scrambler

Page 18

2.Basic Operation

2.5 Optional Voice Scrambler Operation

2.5.1 Activating the Scrambler

The optional Voice scrambler provides private communica- tions. In order to receive or send scrambled transmissions you must ﬁrst activate the Scrambler function. To activate the function, an optional FM-3030 is necessary. See p. 40 for set- ting the scrambler unit. Ask your dealer for details.

Note: The Scrambler function automatically turns OFF when Channel 16 or 70 is selected.

qSelect an operating channel other than Channel 16 or 70. w While pushing [HI/LO], push [LO/DX] ( IC SCR ) to turn

the optional Scrambler function ON.

•“SC” appears.

eTo turn the Scrambler function OFF, repeat step w.

• “SC” disappears.

2.5.2 Programming scrambler codes

There are 32 codes (1 to 32) available for programming when the optional FM-3030 is installed. In order to understand one another, all transceivers in your group must have the same scramble code. This function may not be available depend- ing on dealer setting.

qTurn power OFF.

wWhile pushing [16] ( 9 ), turn power ON to enter Set mode. e After the display appears, release [16] ( 9 ).

r Push [16] ( 9 ) one or more times to select the scrambler code.

•“Scrambler Code” appears.

tRotate [CHANNEL] to select the desired scrambler code. y Turn power OFF, then ON again to exit Set mode.

[Example]: Programming scrambler code 8.

+	Set Mode		Set Mode	Set Mode
+
Enter Set mode Beep		Push one or	Scrambler	Scrambler	Turn OFF
		more times.	Code	Select code Code
	Set mode		Scrambler code item

9

Image 18

Contents Marine VHF Radiotelephone Foreword FM-3000Case of Emergency Do not open the equipment Do not disassemble or modify the equipmentAny repair work must be done by a licensed radio technician Compass Only qualified personal should work in- side the equipmentStandard Steerling TransceiverTable of Contents Installation Setting Tag ChannelsSet Mode Programming Panel DescriptionSystem Conﬁgulation ViiStandard supply & Options Standard supplyOptions SQL control p ControlsFront Panel HI/LO keyDistress key LO/DX IC SCR key16 9 key CH/WX DW U/I/C keyFunction Display Microphone Channel Basic OperationChannel Selection Channel 9 Call channelChange the channel group, if necessary Push once When Weather alert is OFF A. channels Or twiceWeather channels Rotate Channel to select a channelPush HI/LO to select the output power, if necessary Receiving and TransmittingCall Channel Programming Channel CommentsPush Activating the Scrambler Set mode Scrambler code itemOptional Voice Scrambler Operation Programming scrambler codesOperation Dualwatch/Tri-WatchDescription Again Example Operating Tri-watch on INT ChannelScan Operation Scan TypesStarting a Scan Setting Tag ChannelsConvinient Clearing setting all tagged channels Scan startsDSC Individual ID DSC OperationMmsi Code Programming Programming Address ID/Group IDDeleting Address ID/Group ID Set the individual ID and ID nameRotate Channel to select the desired ID name for deleting Edit the digit of the current UTC time by using CHAN- NEL Edit the digit of your latitude data by using ChannelEdit the digit of your longitude data by using Channel Push DSC/ENT to set the time, and exit the DSC menuPosition/Time Indication Sentence formatteres ‘GGA,’ ‘GNS,’ ‘GLL’Distress alert contains default Distress CallSimple call Normal call Push Distress for 5 sec. to transmit the Distress call Transmitting DSC Calls Transmitting Individual callPush DSC/ENT to transmit the Individual call Transmitting Individual acknowledgement Indv ACK Transmitting Group call Push DSC/ENT to transmit the Group callTransmitting All Ships call Push DSC/ENT to transmit the All Ships callTransmitting Position Request call Push DSC/ENT to transmit the Position Request callTransmitting Position Report call Transmitting Position Reply call Transmitting Position Report Reply callPush DSC/ENT to transmit the Position Report call Receiving a Distress acknowledgement Receiving DSC CallsReceiving a Distress call Receiving an Individual callReceiving an All Ships call Receiving a Distress Relay callReceiving a Geographical Area call Receiving a Position Reply call Receiving a Position Request callReceiving a Position Report call Receiving a Position Report Reply callRotate Channel to select Distress, push DSC/ENT Received MessagesDistress message Rotate Channel to scroll the messageOther messages Rotate Channel to select Other, push DSC/ENTRotate Channel to select Offset time, push DSC/ENT DSC Set ModeOffset time Push DSC/ENT to program and to exit the DSC menuCheck the 9-digit Mmsi DSC self ID code Mmsi code checkRotate Channel to select Mmsi Check, push DSC/ENT Push DSC/ENT to exit the DSC menuIntercom Operation Push LO/DX IC SCR for 1 sec. to enter Intercom modeOther Functions FM-3000 callerMicrophone Lock Function Display BacklightingSet Mode Set Mode ProgrammingAuto ACK items are not selectable when using FM-3010 Scan resume timer Set Mode ItemsScan mode Weather alertBeep tone This item adjusts the contrast of the LCD in 8 stepsDSC watch Internal speakerAttenuation level Scrambler codeAutomatic acknowledgement Cleaning Connections and MaintenanceFuse Replacement Antenna ConnectionsAntenna Connector Nmea in Red/NMEA OUT White JacksExternal Speaker Jack Using the supplied mounting bracket Mounting the TransceiverUsing the optional FM-3040 Attach the clamps on either side of the FM-3000Optional Unit Installation Dimensions 145.0 5 23⁄32 103.0 110.0 4 11⁄32 165.0 6 1⁄253.0 ⁄32 Unit mm Troubleshooting Problem Possible Cause Solution† Low power only Channel ListOperating Rules Radio license for boaters U.S.A. onlyGeneral SpeciﬁcationsSpeciﬁcations TransmitterFront and side keys PTT Switch PTT pgsPanel Description Channel UP/DOWN Keys Y/ZLO/DX IC SCR VOLUME/DIMMER KEY VOL DIMCHANNEL/DUALWATCH/TRI-WATCH KEY CH/WX DW U/I/C SQUELCH/MONITOR/LOCK KEY SQL Moni LTop keys Scan Indicator pgs Volume Indicator pSquelch Indicator p 1DUAL/TRI Watch Indicator pgsChannel group Call channel13.3 3 Weather channels A. channelsTurn power on Set output Push H/L to select the output power, if necessaryPush Y/Z to select the desired channel Activating the Lock function Push Y/Z to adjust the backlight levelLock Functions Activating the All key lock functionPush LO/DX to turn the RF Attenuator function on and OFF Monitor FunctionRF Attenuator Function Push CH/WX DW U/I/C severalPush Y/Z to select the desired channel Dualwatch/Tri-watch OperationProgramming scramble codes LO/DX IC SCR to turnTo cancel the tag channel setting, push Scan TAG for 1 sec Convenient Clearing setting all tagged channelsTo stop the scan, push Scan TAG Entering Set mode Turn power OFF While pushing 16 9 , turn power onBeep tone Beep Intercom beep function Push SQL to move to forward then push Y/Z to seAvailable characters 13.17 FM-3010 supplied accessories Accessories included with the FM-3010 QtyConnection cable FM-3011 6 m 20 ft Installation Completed installation should look like thisMm 3⁄32˝ 165 mm 61⁄2 149 mm 57⁄8 R11 Mm 3⁄32