Furuno FM-3000 manual Deleting Address ID/Group ID, Set the individual ID and ID name

rSet the individual ID and ID name.

•Edit the 9 digits of the appropriate distress ID by using [CHAN- NEL].

-Push [CH/WX] or [SCAN] to move the cursor forward or back- ward, respectively.

Note: 1st digit ‘0’ is fixed for a group ID. Thus an address ID input cannot started with ‘0.’ When you input 1st digit ‘0’ and other 8 digits, the ID is automatically registered as a group ID.

Add ID

ID:

NAME:

tPush [DSC/ENT] to program and exit the condition to the normal operation.

5.DSC Operation

DDeleting Address ID/Group ID

qPush [DSC/ENT] to enter the DSC menu.

wRotate [CHANNEL] to select “Set up,” push [DSC/ENT].

eRotate [CHANNEL] to select “Delete ID,” push [DSC/ENT].

•When no address ID is programmed, the transceiver exits the DSC menu automatically.

Set up Add ID

˘Delete ID Offset Time

rRotate [CHANNEL] to select the desired ID name for deleting.

Delete ID ˘Bill

Ricky Tom

tThe delete confirmation display will appear when [DSC/ENT] is pushed.

•Push [HI/LO] to delete ID and exit the DSC Menu.

•Push [DSC/ENT] to cancel deleting and exit the DSC Menu.

14