Furuno FM-3000 Set Mode Programming, Auto ACK items are not selectable when using FM-3010

Page 46

7. Set Mode

7.1 Set Mode Programming

Set mode is used to change the conditions of the trans- ceiver’s functions: scan mode (Normal or Priority), scan re- sume timer, weather alert, Dualwatch/Tri-watch selection, DSC watch, transceiver’s beep tone (transceiver or FM- 3010), internal speaker, LCD contrast (transceiver or FM- 3010), RF attenuation level, scrambler code and automatic acknowledgement.

1.Available functions may differ depending on dealer set- ting.

2.The optional FM-3010 has it’s own settings for the beep tone and LCD contrast.

qTurn power OFF.

wWhile pushing [16] ( 9 ), turn power ON to enter Set mode. e After the display appears, release [16] ( 9 ).

r Push [16] ( 9 ) to select the desired item.

Or push [16] ( 9 ) on the FM-3010 to select the item when using an optional FM-3010.

t Rotate [CHANNEL] to select the desired condition of the item. Use [Y]/[Z] when using an optional FM-3010.

y Turn power OFF, then turn ON again to exit Set mode

•SET MODE CONSTRUCTION

Scan mode	Scan resume timer
Scan Mode	Scan Timer
	Push

Automatic acknowledgement

Weather alert	Dual/tri watch
WX Alert	DUAL/TRI

Push when using FM-3010

DSC Watch, Internal Speaker

DSC watch

DSC Watch

AUTO ACK

Scrambler code*

Scrambler Code

*Scrambeler code is available only when FM-3030 is installed.

Attenuation level

Attenuation

Level

and AUTO ACK items are not selectable when using FM-3010.

LCD contrast	Internal speaker
LCD	Internal
Contrast	Speaker

Beep tone

Beep

37

Image 46

Contents Marine VHF Radiotelephone Foreword FM-3000Case of Emergency Do not disassemble or modify the equipment Do not open the equipmentAny repair work must be done by a licensed radio technician Compass Only qualified personal should work in- side the equipmentStandard Steerling TransceiverTable of Contents Installation Setting Tag ChannelsSet Mode Programming Panel DescriptionSystem Conﬁgulation ViiStandard supply Standard supply & OptionsOptions SQL control p ControlsFront Panel HI/LO keyDistress key LO/DX IC SCR key16 9 key CH/WX DW U/I/C keyFunction Display Microphone Channel Basic OperationChannel Selection Channel 9 Call channelChange the channel group, if necessary Push once When Weather alert is OFF A. channels Or twiceWeather channels Rotate Channel to select a channelPush HI/LO to select the output power, if necessary Receiving and TransmittingChannel Comments Call Channel ProgrammingPush Activating the Scrambler Set mode Scrambler code itemOptional Voice Scrambler Operation Programming scrambler codesOperation Dualwatch/Tri-WatchDescription Again Example Operating Tri-watch on INT ChannelScan Operation Scan TypesStarting a Scan Setting Tag ChannelsConvinient Clearing setting all tagged channels Scan startsDSC Individual ID DSC OperationMmsi Code Programming Programming Address ID/Group IDSet the individual ID and ID name Deleting Address ID/Group IDRotate Channel to select the desired ID name for deleting Edit the digit of the current UTC time by using CHAN- NEL Edit the digit of your latitude data by using ChannelEdit the digit of your longitude data by using Channel Push DSC/ENT to set the time, and exit the DSC menuPosition/Time Indication Sentence formatteres ‘GGA,’ ‘GNS,’ ‘GLL’Distress Call Distress alert contains defaultSimple call Normal call Push Distress for 5 sec. to transmit the Distress call Transmitting Individual call Transmitting DSC CallsPush DSC/ENT to transmit the Individual call Transmitting Individual acknowledgement Indv ACK Transmitting Group call Push DSC/ENT to transmit the Group callTransmitting All Ships call Push DSC/ENT to transmit the All Ships callTransmitting Position Request call Push DSC/ENT to transmit the Position Request callTransmitting Position Report call Transmitting Position Report Reply call Transmitting Position Reply callPush DSC/ENT to transmit the Position Report call Receiving a Distress acknowledgement Receiving DSC CallsReceiving a Distress call Receiving an Individual callReceiving a Distress Relay call Receiving an All Ships callReceiving a Geographical Area call Receiving a Position Reply call Receiving a Position Request callReceiving a Position Report call Receiving a Position Report Reply callRotate Channel to select Distress, push DSC/ENT Received MessagesDistress message Rotate Channel to scroll the messageOther messages Rotate Channel to select Other, push DSC/ENTRotate Channel to select Offset time, push DSC/ENT DSC Set ModeOffset time Push DSC/ENT to program and to exit the DSC menu Check the 9-digit Mmsi DSC self ID code Mmsi code check Rotate Channel to select Mmsi Check, push DSC/ENT Push DSC/ENT to exit the DSC menuIntercom Operation Push LO/DX IC SCR for 1 sec. to enter Intercom modeOther Functions FM-3000 callerMicrophone Lock Function Display BacklightingSet Mode Programming Set ModeAuto ACK items are not selectable when using FM-3010 Scan resume timer Set Mode ItemsScan mode Weather alertBeep tone This item adjusts the contrast of the LCD in 8 stepsDSC watch Internal speakerScrambler code Attenuation levelAutomatic acknowledgement Cleaning Connections and MaintenanceFuse Replacement Antenna ConnectionsNmea in Red/NMEA OUT White Jacks Antenna ConnectorExternal Speaker Jack Using the supplied mounting bracket Mounting the TransceiverUsing the optional FM-3040 Attach the clamps on either side of the FM-3000Optional Unit Installation 145.0 5 23⁄32 103.0 110.0 4 11⁄32 165.0 6 1⁄2 Dimensions53.0 ⁄32 Unit mm Troubleshooting Problem Possible Cause Solution† Low power only Channel ListOperating Rules Radio license for boaters U.S.A. onlyGeneral SpeciﬁcationsSpeciﬁcations TransmitterFront and side keys PTT Switch PTT pgsPanel Description Channel UP/DOWN Keys Y/ZLO/DX IC SCR VOLUME/DIMMER KEY VOL DIMCHANNEL/DUALWATCH/TRI-WATCH KEY CH/WX DW U/I/C SQUELCH/MONITOR/LOCK KEY SQL Moni LTop keys Scan Indicator pgs Volume Indicator pSquelch Indicator p 1DUAL/TRI Watch Indicator pgsChannel group Call channel13.3 3 Weather channels A. channelsPush H/L to select the output power, if necessary Turn power on Set outputPush Y/Z to select the desired channel Activating the Lock function Push Y/Z to adjust the backlight levelLock Functions Activating the All key lock functionPush LO/DX to turn the RF Attenuator function on and OFF Monitor FunctionRF Attenuator Function Push CH/WX DW U/I/C severalPush Y/Z to select the desired channel Dualwatch/Tri-watch OperationProgramming scramble codes LO/DX IC SCR to turnConvenient Clearing setting all tagged channels To cancel the tag channel setting, push Scan TAG for 1 secTo stop the scan, push Scan TAG Turn power OFF While pushing 16 9 , turn power on Entering Set modeBeep tone Beep Push SQL to move to forward then push Y/Z to se Intercom beep functionAvailable characters Accessories included with the FM-3010 Qty 13.17 FM-3010 supplied accessoriesConnection cable FM-3011 6 m 20 ft Installation Completed installation should look like thisMm 3⁄32˝ 165 mm 61⁄2 149 mm 57⁄8 R11 Mm 3⁄32