Furuno FM-3000 manual Attenuation level, Scrambler code, Automatic acknowledgement

Page 49

7.2.9 Attenuation level

This item sets the receive attenuation level for the Attenuator function from 3 levels.

Set Mode

Attenuation

Level

Attenuation level 1 (default)

7.2.10 Scrambler code

(Appears only when a scrambler unit is installed)

When an optional scrambler unit is installed, the scrambler code can be set depending on dealer setting.

When the FM-3030 is installed, 32 codes (1 to 32) can be se- lected.

Set Mode

Scrambler

Code

Scrambler code 1 (default)

Scrambler code 32

7.Set Mode

7.2.11 Automatic acknowledgement

This item sets the Automatic acknowledgement function ON or OFF.

When Position Request or Position Report call is received, transceiver automatically transmits Position Reply or Position Report Reply, respectively.

Set Mode

AUTO ACK

Auto ACK OFF (default)

Auto ACK ON

Image 49

Contents Marine VHF Radiotelephone FM-3000 ForewordCase of Emergency Do not disassemble or modify the equipment Do not open the equipmentAny repair work must be done by a licensed radio technician Standard Steerling Only qualified personal should work in- side the equipmentCompass TransceiverTable of Contents Set Mode Programming Setting Tag ChannelsInstallation Panel DescriptionVii System ConﬁgulationStandard supply Standard supply & OptionsOptions Front Panel ControlsSQL control p HI/LO key16 9 key LO/DX IC SCR keyDistress key CH/WX DW U/I/C keyFunction Display Microphone Channel Selection Basic OperationChannel Channel 9 Call channelWeather channels Push once When Weather alert is OFF A. channels Or twiceChange the channel group, if necessary Rotate Channel to select a channelReceiving and Transmitting Push HI/LO to select the output power, if necessaryChannel Comments Call Channel ProgrammingPush Optional Voice Scrambler Operation Set mode Scrambler code itemActivating the Scrambler Programming scrambler codesDescription Dualwatch/Tri-WatchOperation Again Example Operating Tri-watch on INT ChannelScan Types Scan OperationConvinient Clearing setting all tagged channels Setting Tag ChannelsStarting a Scan Scan startsMmsi Code Programming DSC OperationDSC Individual ID Programming Address ID/Group IDSet the individual ID and ID name Deleting Address ID/Group IDRotate Channel to select the desired ID name for deleting Edit the digit of your longitude data by using Channel Edit the digit of your latitude data by using ChannelEdit the digit of the current UTC time by using CHAN- NEL Push DSC/ENT to set the time, and exit the DSC menuSentence formatteres ‘GGA,’ ‘GNS,’ ‘GLL’ Position/Time IndicationDistress Call Distress alert contains defaultSimple call Normal call Push Distress for 5 sec. to transmit the Distress call Transmitting Individual call Transmitting DSC CallsPush DSC/ENT to transmit the Individual call Transmitting Individual acknowledgement Indv ACK Push DSC/ENT to transmit the Group call Transmitting Group callPush DSC/ENT to transmit the All Ships call Transmitting All Ships callPush DSC/ENT to transmit the Position Request call Transmitting Position Request callTransmitting Position Report call Transmitting Position Report Reply call Transmitting Position Reply callPush DSC/ENT to transmit the Position Report call Receiving a Distress call Receiving DSC CallsReceiving a Distress acknowledgement Receiving an Individual callReceiving a Distress Relay call Receiving an All Ships callReceiving a Geographical Area call Receiving a Position Report call Receiving a Position Request callReceiving a Position Reply call Receiving a Position Report Reply callDistress message Received MessagesRotate Channel to select Distress, push DSC/ENT Rotate Channel to scroll the messageRotate Channel to select Other, push DSC/ENT Other messagesOffset time DSC Set ModeRotate Channel to select Offset time, push DSC/ENT Push DSC/ENT to program and to exit the DSC menuRotate Channel to select Mmsi Check, push DSC/ENT Mmsi code checkCheck the 9-digit Mmsi DSC self ID code Push DSC/ENT to exit the DSC menuOther Functions Push LO/DX IC SCR for 1 sec. to enter Intercom modeIntercom Operation FM-3000 callerDisplay Backlighting Microphone Lock Function Set Mode Programming Set Mode Auto ACK items are not selectable when using FM-3010 Scan mode Set Mode ItemsScan resume timer Weather alertDSC watch This item adjusts the contrast of the LCD in 8 stepsBeep tone Internal speakerScrambler code Attenuation levelAutomatic acknowledgement Fuse Replacement Connections and MaintenanceCleaning Antenna ConnectionsNmea in Red/NMEA OUT White Jacks Antenna ConnectorExternal Speaker Jack Mounting the Transceiver Using the supplied mounting bracketAttach the clamps on either side of the FM-3000 Using the optional FM-3040Optional Unit Installation 145.0 5 23⁄32 103.0 110.0 4 11⁄32 165.0 6 1⁄2 Dimensions53.0 ⁄32 Unit mm Problem Possible Cause Solution TroubleshootingChannel List † Low power onlyRadio license for boaters U.S.A. only Operating RulesSpeciﬁcations SpeciﬁcationsGeneral TransmitterPanel Description PTT Switch PTT pgsFront and side keys Channel UP/DOWN Keys Y/ZCHANNEL/DUALWATCH/TRI-WATCH KEY CH/WX DW U/I/C VOLUME/DIMMER KEY VOL DIMLO/DX IC SCR SQUELCH/MONITOR/LOCK KEY SQL Moni LTop keys Squelch Indicator p Volume Indicator pScan Indicator pgs 1DUAL/TRI Watch Indicator pgs13.3 3 Weather channels Call channelChannel group A. channelsPush H/L to select the output power, if necessary Turn power on Set outputPush Y/Z to select the desired channel Lock Functions Push Y/Z to adjust the backlight levelActivating the Lock function Activating the All key lock functionRF Attenuator Function Monitor FunctionPush LO/DX to turn the RF Attenuator function on and OFF Push CH/WX DW U/I/C severalProgramming scramble codes Dualwatch/Tri-watch OperationPush Y/Z to select the desired channel LO/DX IC SCR to turnConvenient Clearing setting all tagged channels To cancel the tag channel setting, push Scan TAG for 1 secTo stop the scan, push Scan TAG Turn power OFF While pushing 16 9 , turn power on Entering Set modeBeep tone Beep Push SQL to move to forward then push Y/Z to se Intercom beep functionAvailable characters Accessories included with the FM-3010 Qty 13.17 FM-3010 supplied accessoriesConnection cable FM-3011 6 m 20 ft Completed installation should look like this InstallationMm 3⁄32˝ R11 Mm 3⁄32 165 mm 61⁄2 149 mm 57⁄8