Furuno FM-3000 manual Connections and Maintenance, Antenna Connections, Fuse Replacement, Cleaning

Page 50

8. Connections and Maintenance

8.1 Antenna

8.4 Connections

A key element in the performance of any communication sys- tem is an antenna. Ask your dealer about antennas and the best place to mount them.

8.2 Fuse Replacement

One fuse is installed in the supplied DC power cable. If a fuse blows or the transceiver stops functioning, track down the source of the problem, if possible, and replace the damaged fuse with a new, rated one.

t r

Fuse rating: 10 A

8.3 Cleaning

If the transceiver becomes dusty or dirty, wipe it clean with a soft, dry cloth.

AVOID the use of solvents such as benzene or al- cohol, as they may damage transceiver surfaces.

qDC POWER CONNECTOR

Connects the supplied DC power cable from this connector to an external 13.8 V DC power source.

wEXTERNAL MICROPHONE JACKS

Connects to optional FM-3010 CONTROLLABLE MIC.

RCAUTION

NEVER connect other microphones, this may cause damage to the transceiver.

Image 50

Contents Marine VHF Radiotelephone Foreword FM-3000Case of Emergency Any repair work must be done by a licensed radio technician Do not open the equipmentDo not disassemble or modify the equipment Compass Only qualified personal should work in- side the equipmentStandard Steerling TransceiverTable of Contents Installation Setting Tag ChannelsSet Mode Programming Panel DescriptionSystem Conﬁgulation ViiOptions Standard supply & OptionsStandard supply SQL control p ControlsFront Panel HI/LO keyDistress key LO/DX IC SCR key16 9 key CH/WX DW U/I/C keyFunction Display Microphone Channel Basic OperationChannel Selection Channel 9 Call channelChange the channel group, if necessary Push once When Weather alert is OFF A. channels Or twiceWeather channels Rotate Channel to select a channelPush HI/LO to select the output power, if necessary Receiving and TransmittingPush Call Channel ProgrammingChannel Comments Activating the Scrambler Set mode Scrambler code itemOptional Voice Scrambler Operation Programming scrambler codesOperation Dualwatch/Tri-WatchDescription Again Example Operating Tri-watch on INT ChannelScan Operation Scan TypesStarting a Scan Setting Tag ChannelsConvinient Clearing setting all tagged channels Scan startsDSC Individual ID DSC OperationMmsi Code Programming Programming Address ID/Group IDRotate Channel to select the desired ID name for deleting Deleting Address ID/Group IDSet the individual ID and ID name Edit the digit of the current UTC time by using CHAN- NEL Edit the digit of your latitude data by using ChannelEdit the digit of your longitude data by using Channel Push DSC/ENT to set the time, and exit the DSC menuPosition/Time Indication Sentence formatteres ‘GGA,’ ‘GNS,’ ‘GLL’Simple call Distress alert contains defaultDistress Call Normal call Push Distress for 5 sec. to transmit the Distress call Push DSC/ENT to transmit the Individual call Transmitting DSC CallsTransmitting Individual call Transmitting Individual acknowledgement Indv ACK Transmitting Group call Push DSC/ENT to transmit the Group callTransmitting All Ships call Push DSC/ENT to transmit the All Ships callTransmitting Position Request call Push DSC/ENT to transmit the Position Request callTransmitting Position Report call Push DSC/ENT to transmit the Position Report call Transmitting Position Reply callTransmitting Position Report Reply call Receiving a Distress acknowledgement Receiving DSC CallsReceiving a Distress call Receiving an Individual callReceiving a Geographical Area call Receiving an All Ships callReceiving a Distress Relay call Receiving a Position Reply call Receiving a Position Request callReceiving a Position Report call Receiving a Position Report Reply callRotate Channel to select Distress, push DSC/ENT Received MessagesDistress message Rotate Channel to scroll the messageOther messages Rotate Channel to select Other, push DSC/ENTRotate Channel to select Offset time, push DSC/ENT DSC Set ModeOffset time Push DSC/ENT to program and to exit the DSC menuCheck the 9-digit Mmsi DSC self ID code Mmsi code checkRotate Channel to select Mmsi Check, push DSC/ENT Push DSC/ENT to exit the DSC menuIntercom Operation Push LO/DX IC SCR for 1 sec. to enter Intercom modeOther Functions FM-3000 callerMicrophone Lock Function Display BacklightingAuto ACK items are not selectable when using FM-3010 Set ModeSet Mode Programming Scan resume timer Set Mode Items Scan mode Weather alertBeep tone This item adjusts the contrast of the LCD in 8 stepsDSC watch Internal speakerAutomatic acknowledgement Attenuation levelScrambler code Cleaning Connections and MaintenanceFuse Replacement Antenna ConnectionsExternal Speaker Jack Antenna ConnectorNmea in Red/NMEA OUT White Jacks Using the supplied mounting bracket Mounting the TransceiverUsing the optional FM-3040 Attach the clamps on either side of the FM-3000Optional Unit Installation 53.0 ⁄32 Unit mm Dimensions145.0 5 23⁄32 103.0 110.0 4 11⁄32 165.0 6 1⁄2 Troubleshooting Problem Possible Cause Solution† Low power only Channel ListOperating Rules Radio license for boaters U.S.A. onlyGeneral SpeciﬁcationsSpeciﬁcations TransmitterFront and side keys PTT Switch PTT pgsPanel Description Channel UP/DOWN Keys Y/ZLO/DX IC SCR VOLUME/DIMMER KEY VOL DIMCHANNEL/DUALWATCH/TRI-WATCH KEY CH/WX DW U/I/C SQUELCH/MONITOR/LOCK KEY SQL Moni LTop keys Scan Indicator pgs Volume Indicator pSquelch Indicator p 1DUAL/TRI Watch Indicator pgsChannel group Call channel13.3 3 Weather channels A. channelsPush Y/Z to select the desired channel Turn power on Set outputPush H/L to select the output power, if necessary Activating the Lock function Push Y/Z to adjust the backlight levelLock Functions Activating the All key lock functionPush LO/DX to turn the RF Attenuator function on and OFF Monitor FunctionRF Attenuator Function Push CH/WX DW U/I/C severalPush Y/Z to select the desired channel Dualwatch/Tri-watch OperationProgramming scramble codes LO/DX IC SCR to turnTo stop the scan, push Scan TAG To cancel the tag channel setting, push Scan TAG for 1 secConvenient Clearing setting all tagged channels Beep tone Beep Entering Set modeTurn power OFF While pushing 16 9 , turn power on Available characters Intercom beep functionPush SQL to move to forward then push Y/Z to se Connection cable FM-3011 6 m 20 ft 13.17 FM-3010 supplied accessoriesAccessories included with the FM-3010 Qty Installation Completed installation should look like thisMm 3⁄32˝ 165 mm 61⁄2 149 mm 57⁄8 R11 Mm 3⁄32