DKS Enterprises 1802, 1808 owner manual Surface Mount 1803 and 1810 Units

Page 10

1.1.1 Surface Mount 1803 and 1810 Units

Surface mount units can be mounted directly to a wall or pilaster, or can be post mounted using a DoorKing heavy-duty mounting post (p/n 1200-047 and 1200-048). Be sure the unit is mounted securely and is not subject to vibration from closing doors or gates.

CAUTON! If this entry system is used to control a vehicular gate with an automatic gate operator, the entry system must be mounted a minimum of ten (10) feet away from the gate and gate operator, or in such a way that a person cannot operate the entry system and touch the gate or gate operator at the same time.

. 8 7 5

9.0
.25 DIA
1 1 . 0	1 3 . 0
.875 DIA
.5
2.625
5.625
11.25

4.75

3.25

1.625

2.5

.875 DIA

10

Image 10

Contents 1802, 1803, 1808, 1810 Telephone Entry Systems Page Use this manual with the following models only Table of Contents Maintenance and Trouble Shooting Important Notice ListingGeneral Information Features Installation Installation Guidelines ALL SystemsSurface Mount 1803 and 1810 Units Surface Mount 1803 and 1810 Units with Recess Box Flush Mount 1803 and 1810 Units Flush Mount Rough-in Box applies to 1803 and 1810 only Flush Mount Trim Ring use with 1803 and 1810 units only 12.0 375 125 DIA 125 SQ 625 7 1802 Surface Mount Only 8 1808 Surface Mount Only Memory Chip Installation Postal Lock Installation Page Wiring 18AWG Main Terminal Description Terminal DescriptionWiring Description Relay Wiring Typical Controlling a Single Door or GateControlling a Gate Operator and Pedestrian Gate or Door Programming from an Offsite Location Programming from the KeypadProgramming Notes Single or Multiple Systems General ProgrammingMaster Code Relay Strike TimeTalk Time Tone Open NumbersTouch-tone / Rotary-dial Postal SwitchNumber of Rings to Answer Keypad Function Star * Key FunctionProgramming the Directory Code Length Phone Number ProgrammingProgramming 7-digit Phone Numbers Programming Phone Numbers with Area Code Reference Programming Area CodesDeleting Individual Phone Numbers Display / Delete Phone Numbers Delete All Phone NumbersDisplay Phone Numbers with known Directory Codes Delete Four-Digit Entry Codes Entry Code ProgrammingFour-Digit Entry Code Programming Delete All Four-Digit Entry CodesDelete All Five-Digit Entry Codes Five-Digit Entry Code ProgrammingDelete Five-Digit Entry Codes Five-Digit Entry Code Divide NumberTime Clock Programming Time Functions ProgrammingAutomatic Relay Activation Time Zones Four-Digit Entry Code Time Zone Five-Digit Entry Code Time ZoneFlash Entry Codes Relay 2 Terminals Click Sensitivity Speaker VolumeFeedback Display Contrast 1802, 1803, 1810 onlyRing Pin Master Code SwitchHandset / Hands Free Guest Instructions Using an Entry CodeGeneral Instructions Responding to a Guest CallRemote Relay Activation System AdministratorRemote Programming Relay CheckEntry Code Time Zone Enable / Disable Auto Relay Time Zone Enable / DisableMiscellaneous Operating Instructions Switch Input OperationLine Sharing Connection to a PBX Areas with 10-digit DialingPage Maintenance Trouble ShootingSympton Possible Solutions Accessories LOG Tables Name Phone Number Directory Code Entry Alternate Area Code Name Phone Number Directory Code Entry Alternate Area Code Resident Instruction Sheet