DKS Enterprises 1808 Entry Code Time Zone Enable / Disable, Auto Relay Time Zone Enable / Disable

Page 45

5.2.4 Entry Code Time Zone Enable / Disable

The entry code time zones can be turned off or on remotely from a touch-tone telephone at any time without changing the time zone boundaries. To program the time zone boundaries, see sections

2.4.3and 2.4.4. Entry code time zones can also be turned off or on at the system keypad by skipping step 1 and proceeding directly to step 2 in the sequence below.

1.Call the telephone number that the entry system is installed on. The system will answer with a short tone (beep). Note: the number of rings before the system answers is dependent on the programming in 3.1.8.

2.Press for four-digit entry code time zones or press for five-digit entry code time zones.

3.Enter the four-digit master code BBBB(beep).

4.Press (beep) to turn the time zone OFF, or press (beep) to turn the time zone ON.

5.Hang up or if at the system keypad, press together (beeeeeep).

5.2.5 Auto Relay Time Zone Enable / Disable

The four time zones that automatically activate and deactivate the relays can be turned off or on from a touch-tone telephone at any time without changing the time zone boundaries. To program the auto relay activation time zone boundaries, see section 2.4.2. Auto relay time zone boundaries can also be turned off or on at the system keypad by skipping step 1 and proceeding directly to step 2 in the sequence below.

1.Call the telephone number that the entry system is installed on. The system will answer with a short tone (beep). Note: the number of rings before the system answers is dependent on the programming in 3.1.8.

2.Press and enter the four-digit master code BBBB(beep).

3.Enter the time zone number Bthat you want to turn off or on, then press (beep).

4.Press (beep) to turn the time zone OFF, or press (beep) to turn the time zone ON.

5.Hang up or if at the system keypad, press 0# together (beeeeeep).

45

Image 45

Contents 1802, 1803, 1808, 1810 Telephone Entry Systems Page Use this manual with the following models only Table of Contents Maintenance and Trouble Shooting Listing Important NoticeGeneral Information Features Installation Guidelines ALL Systems InstallationSurface Mount 1803 and 1810 Units Surface Mount 1803 and 1810 Units with Recess Box Flush Mount 1803 and 1810 Units Flush Mount Rough-in Box applies to 1803 and 1810 only Flush Mount Trim Ring use with 1803 and 1810 units only 12.0 375 125 DIA 125 SQ 625 7 1802 Surface Mount Only 8 1808 Surface Mount Only Memory Chip Installation Postal Lock Installation Page Wiring 18AWG Terminal Description Main Terminal DescriptionWiring Description Controlling a Single Door or Gate Relay Wiring TypicalControlling a Gate Operator and Pedestrian Gate or Door Programming from the Keypad Programming from an Offsite LocationProgramming Notes Master Code General ProgrammingSingle or Multiple Systems Relay Strike TimeTone Open Numbers Talk TimePostal Switch Touch-tone / Rotary-dialNumber of Rings to Answer Star * Key Function Keypad FunctionPhone Number Programming Programming the Directory Code LengthProgramming 7-digit Phone Numbers Programming Area Codes Programming Phone Numbers with Area Code ReferenceDeleting Individual Phone Numbers Delete All Phone Numbers Display / Delete Phone NumbersDisplay Phone Numbers with known Directory Codes Four-Digit Entry Code Programming Entry Code ProgrammingDelete Four-Digit Entry Codes Delete All Four-Digit Entry CodesDelete Five-Digit Entry Codes Five-Digit Entry Code ProgrammingDelete All Five-Digit Entry Codes Five-Digit Entry Code Divide NumberTime Functions Programming Time Clock ProgrammingAutomatic Relay Activation Time Zones Five-Digit Entry Code Time Zone Four-Digit Entry Code Time ZoneFlash Entry Codes Relay 2 Terminals Feedback Speaker VolumeClick Sensitivity Display Contrast 1802, 1803, 1810 onlyMaster Code Switch Ring PinHandset / Hands Free General Instructions Using an Entry CodeGuest Instructions Responding to a Guest CallRemote Programming System AdministratorRemote Relay Activation Relay CheckAuto Relay Time Zone Enable / Disable Entry Code Time Zone Enable / DisableSwitch Input Operation Miscellaneous Operating InstructionsLine Sharing Areas with 10-digit Dialing Connection to a PBXPage Trouble Shooting MaintenanceSympton Possible Solutions Accessories LOG Tables Name Phone Number Directory Code Entry Alternate Area Code Name Phone Number Directory Code Entry Alternate Area Code Resident Instruction Sheet