DKS Enterprises 1810, 1803, 1808, 1802 owner manual Accessories

SYMPTON		POSSIBLE SOLUTION(S)
Four-digit entry codes	•	Forgetting to press # first.
will not work.	•	Entry code is time zone restricted. Reprogram time zone or turn time zone off
		(5.2.4).
	•	Entry code attempted was a flash code that is no longer valid.
Five-digit entry codes	•	Forgetting to press ## first.
will not work.	•	Entry code is time zone restricted. Reprogram time zone or turn time zone off
		(5.2.4).
Entry codes will not	•	Programmed entry codes are greater than the divide number. Reprogram
activate relay 1.		divide number or program entry codes less than the divide number.
Entry codes will not	•	Programmed entry codes are less than or equal to the divide number.
activate relay 2.		Reprogram divide number or program entry codes greater than the divide
		number
System emits a beep	•	Master code switch is in the ON position.
every 30 seconds.
LCD is unreadable	•	Adjust contrast.
(1802, 1803, 1810
units only).

6.2 ACCESSORIES

Surface Trim Ring	Use to recess surface mount 1803 or 1810 units into a wall or column.
	P/N 1803-150.
Flush Kit	Use to install flush style 1803 or 1810 units into a wall or column. Kit
	includes rough in back box and trim ring. P/N 1814-165 comes with
	stainless steel trim ring. P/N 1814-166 comes with gold plated trim ring.
Flush Ring	Use to surface mount a flush style 1803 or 1810 unit. P/N 1814-152.
Stainless Steel Case	Replaces the black steel surface mount case on the 1803 and 1810 units
	with a stainless steel case. P/N 1810-102.
Surge Suppressers	High voltage (120 V) suppresser: P/N 1878-076.
	Phone line suppresser: P/N 1878-077.
	Low voltage (28 V) suppresser: P/N 1878-078.
Mounting Post	Standard gooseneck mounting post: P/N 1200-045.
	Standard gooseneck mounting post – long: P/N 1200-046
	Heavy-duty gooseneck mounting post: P/N 1200-047.
	Heavy-duty gooseneck mounting post – Long: P/N 1200-048.
Telephone Test Set	Includes clips, cord and carrying case. P/N 1800-050.
Battery	12 volt .8 amp hour gel cell provides stand by power during power
	interruptions. P/N 1801-008.

51