DKS Enterprises 1803, 1808, 1802, 1810 owner manual Features

Page 8

FEATURES

•Can provide service for up to 1000 residents.

•System can be programmed from the front keypad or remotely using a touch-tone telephone.

•System keypad will emit DTMF tones after a call is answered allowing the system to be used with auto-attendants, answering machines, etc.

•Directory codes can be set from 1 to 4 digits in length and can be randomly assigned.

•10 programmable area codes allow the system to be used in areas requiring 10 and 11-digit dialing.

•Two internal relays allow the system to control a main entry point plus an additional entry point.

•Built in time clock provides hold open time zones, entry code time zones and “Flash” entry codes.

•5-digit entry codes available for special needs.

•Programmable switch inputs can be set to activate a relay or to dial a preprogrammed phone number.

8

Image 8

Contents 1802, 1803, 1808, 1810 Telephone Entry Systems Page Use this manual with the following models only Table of Contents Maintenance and Trouble Shooting Important Notice ListingGeneral Information Features Installation Installation Guidelines ALL SystemsSurface Mount 1803 and 1810 Units Surface Mount 1803 and 1810 Units with Recess Box Flush Mount 1803 and 1810 Units Flush Mount Rough-in Box applies to 1803 and 1810 only Flush Mount Trim Ring use with 1803 and 1810 units only 12.0 375 125 DIA 125 SQ 625 7 1802 Surface Mount Only 8 1808 Surface Mount Only Memory Chip Installation Postal Lock Installation Page Wiring 18AWG Main Terminal Description Terminal DescriptionWiring Description Relay Wiring Typical Controlling a Single Door or GateControlling a Gate Operator and Pedestrian Gate or Door Programming Notes Programming from the KeypadProgramming from an Offsite Location General Programming Master CodeSingle or Multiple Systems Relay Strike TimeTalk Time Tone Open NumbersNumber of Rings to Answer Postal SwitchTouch-tone / Rotary-dial Keypad Function Star * Key FunctionProgramming 7-digit Phone Numbers Phone Number ProgrammingProgramming the Directory Code Length Deleting Individual Phone Numbers Programming Area CodesProgramming Phone Numbers with Area Code Reference Display Phone Numbers with known Directory Codes Delete All Phone NumbersDisplay / Delete Phone Numbers Entry Code Programming Four-Digit Entry Code ProgrammingDelete Four-Digit Entry Codes Delete All Four-Digit Entry CodesFive-Digit Entry Code Programming Delete Five-Digit Entry CodesDelete All Five-Digit Entry Codes Five-Digit Entry Code Divide NumberAutomatic Relay Activation Time Zones Time Functions ProgrammingTime Clock Programming Four-Digit Entry Code Time Zone Five-Digit Entry Code Time ZoneFlash Entry Codes Relay 2 Terminals Speaker Volume FeedbackClick Sensitivity Display Contrast 1802, 1803, 1810 onlyHandset / Hands Free Master Code SwitchRing Pin Using an Entry Code General InstructionsGuest Instructions Responding to a Guest CallSystem Administrator Remote ProgrammingRemote Relay Activation Relay CheckEntry Code Time Zone Enable / Disable Auto Relay Time Zone Enable / DisableLine Sharing Switch Input OperationMiscellaneous Operating Instructions Connection to a PBX Areas with 10-digit DialingPage Maintenance Trouble ShootingSympton Possible Solutions Accessories LOG Tables Name Phone Number Directory Code Entry Alternate Area Code Name Phone Number Directory Code Entry Alternate Area Code Resident Instruction Sheet