DKS Enterprises 1808, 1803, 1802, 1810 owner manual Talk Time, Tone Open Numbers

Page 29

3.1.4 Talk Time

This programming sequence sets the maximum time allowed for conversation when the entry system places a call to the resident. The talk time can be set from 1 second up to 255 seconds (4 minutes, 15 seconds) and is entered as a three-digit number. For example, to set a talk time of 20 seconds, enter 020 in step 3. The talk time set here does not affect the telephone numbers that are programmed under directory codes 0, 00, 000, 0000 and 1, 01, 001, 0001. The talk time for these two directory codes are factory set to the maximum. Phone numbers programmed under these directory codes should be reserved for management or emergency phone numbers that generally require longer conversations.

Factory setting for talk time = 60 seconds.

1.Press ￿and enter the four digit MASTER CODE BBBB(beep).

2.Enter three digits for talk time (seconds) BBB(001-255) then press ￿(beep).

3.Press ￿￿TOGETHER to end this programming step (beeeeeep).

3.1.5 Tone Open Numbers

These steps will program the tone open numbers for relays 1 and 2. You will need to enter a four- digit number (see chart below) to set the relay functions. If a function is not desired, enter # in place of a number. For example, if you want the relay to have a momentary activation function only, and you want the relay to activate when the number 9 is pressed, enter ￿￿￿￿in step 3. Do not duplicate tone open numbers, i.e., don’t set relay 1, and 2 tone-open numbers to 9.

Factory setting is: Relay 1 = 9876, Relay 2 = 5432.

1.Press ￿and enter the four-digit MASTER CODE BBBB(beep).

2.Press ￿￿to set relay 1 or ￿￿to set relay 2 tone numbers.

3.Enter the four-digit tone open number code BBBBthen press ￿(beep).

4.Repeat steps 2 and 3 to set the other relay tone open numbers.

5.Press ￿￿TOGETHER to end this programming step (beeeeeep).

DIGIT

FUNCTION

1Momentary activation. Relay will activate for the programmed strike time (3.1.3).

2Relay hold. Relay will activate and remain activated until commanded to release.

3Relay release. Deactivates the relay hold command.

4Relay hold 1-hour. Relay will activate for 1-hour and then will automatically deactivate itself.

29

Page 28 Page 30
Image 29
Page 28 Page 30
Contents 1802, 1803, 1808, 1810 Telephone Entry Systems Page Use this manual with the following models only Table of Contents Maintenance and Trouble Shooting Listing Important NoticeGeneral Information Features Installation Guidelines ALL Systems InstallationSurface Mount 1803 and 1810 Units Surface Mount 1803 and 1810 Units with Recess Box Flush Mount 1803 and 1810 Units Flush Mount Rough-in Box applies to 1803 and 1810 only Flush Mount Trim Ring use with 1803 and 1810 units only 12.0 375 125 DIA 125 SQ 625 7 1802 Surface Mount Only 8 1808 Surface Mount Only Memory Chip Installation Postal Lock Installation Page Wiring 18AWG Terminal Description Main Terminal DescriptionWiring Description Controlling a Single Door or Gate Relay Wiring TypicalControlling a Gate Operator and Pedestrian Gate or Door Programming Notes Programming from the KeypadProgramming from an Offsite Location Master Code General ProgrammingSingle or Multiple Systems Relay Strike TimeTone Open Numbers Talk TimeNumber of Rings to Answer Postal SwitchTouch-tone / Rotary-dial Star * Key Function Keypad FunctionProgramming 7-digit Phone Numbers Phone Number ProgrammingProgramming the Directory Code Length Deleting Individual Phone Numbers Programming Area CodesProgramming Phone Numbers with Area Code Reference Display Phone Numbers with known Directory Codes Delete All Phone NumbersDisplay / Delete Phone Numbers Four-Digit Entry Code Programming Entry Code ProgrammingDelete Four-Digit Entry Codes Delete All Four-Digit Entry CodesDelete Five-Digit Entry Codes Five-Digit Entry Code ProgrammingDelete All Five-Digit Entry Codes Five-Digit Entry Code Divide NumberAutomatic Relay Activation Time Zones Time Functions ProgrammingTime Clock Programming Five-Digit Entry Code Time Zone Four-Digit Entry Code Time ZoneFlash Entry Codes Relay 2 Terminals Feedback Speaker VolumeClick Sensitivity Display Contrast 1802, 1803, 1810 onlyHandset / Hands Free Master Code SwitchRing Pin General Instructions Using an Entry CodeGuest Instructions Responding to a Guest CallRemote Programming System AdministratorRemote Relay Activation Relay CheckAuto Relay Time Zone Enable / Disable Entry Code Time Zone Enable / DisableLine Sharing Switch Input OperationMiscellaneous Operating Instructions Areas with 10-digit Dialing Connection to a PBXPage Trouble Shooting MaintenanceSympton Possible Solutions Accessories LOG Tables Name Phone Number Directory Code Entry Alternate Area Code Name Phone Number Directory Code Entry Alternate Area Code Resident Instruction Sheet
Top Page Image Contents