DKS Enterprises 1802, 1808 owner manual Flush Mount Trim Ring use with 1803 and 1810 units only

Page 14

1.1.5 Flush Mount Trim Ring (use with 1803 and 1810 units only)

Flush mount units can be mounted by using the 1814-065 (stainless) or 1814-066 (gold) mounting kit. Flush mounting kits are not included with the unit. Flush mount units are not designed for direct exposure to the weather. Be sure the unit is mounted securely and is not subject to vibration from closing doors or gates.

CAUTON! If this entry system is used to control a vehicular gate with an automatic gate operator, the entry system must be mounted a minimum of ten (10) feet away from the gate and gate operator, or in such a way that a person cannot operate the entry system and touch the gate or gate operator at the same time.

2.625

.25 DIA

1.25 DIA

14.25

9.0

1.25 DIA

.875	1.0

3.0

5.875

1 . 1 2 5

3.0

7.0

8.5

11.75

3.625

2.25


										. 6 2 5
	1.0				6.0					. 6 2 5
	1				1					3
										1

Rough-in	Trim	Flush Mount
Box	Ring	Entry System
1 . 6 2 5

14

Image 14

Contents 1802, 1803, 1808, 1810 Telephone Entry Systems Page Use this manual with the following models only Table of Contents Maintenance and Trouble Shooting Important Notice ListingGeneral Information Features Installation Installation Guidelines ALL SystemsSurface Mount 1803 and 1810 Units Surface Mount 1803 and 1810 Units with Recess Box Flush Mount 1803 and 1810 Units Flush Mount Rough-in Box applies to 1803 and 1810 only Flush Mount Trim Ring use with 1803 and 1810 units only 12.0 375 125 DIA 125 SQ 625 7 1802 Surface Mount Only 8 1808 Surface Mount Only Memory Chip Installation Postal Lock Installation Page Wiring 18AWG Main Terminal Description Terminal DescriptionWiring Description Relay Wiring Typical Controlling a Single Door or GateControlling a Gate Operator and Pedestrian Gate or Door Programming Notes Programming from the KeypadProgramming from an Offsite Location Single or Multiple Systems General ProgrammingMaster Code Relay Strike TimeTalk Time Tone Open NumbersNumber of Rings to Answer Postal SwitchTouch-tone / Rotary-dial Keypad Function Star * Key FunctionProgramming 7-digit Phone Numbers Phone Number ProgrammingProgramming the Directory Code Length Deleting Individual Phone Numbers Programming Area CodesProgramming Phone Numbers with Area Code Reference Display Phone Numbers with known Directory Codes Delete All Phone NumbersDisplay / Delete Phone Numbers Delete Four-Digit Entry Codes Entry Code ProgrammingFour-Digit Entry Code Programming Delete All Four-Digit Entry CodesDelete All Five-Digit Entry Codes Five-Digit Entry Code ProgrammingDelete Five-Digit Entry Codes Five-Digit Entry Code Divide NumberAutomatic Relay Activation Time Zones Time Functions ProgrammingTime Clock Programming Four-Digit Entry Code Time Zone Five-Digit Entry Code Time ZoneFlash Entry Codes Relay 2 Terminals Click Sensitivity Speaker VolumeFeedback Display Contrast 1802, 1803, 1810 onlyHandset / Hands Free Master Code SwitchRing Pin Guest Instructions Using an Entry CodeGeneral Instructions Responding to a Guest CallRemote Relay Activation System AdministratorRemote Programming Relay CheckEntry Code Time Zone Enable / Disable Auto Relay Time Zone Enable / DisableLine Sharing Switch Input OperationMiscellaneous Operating Instructions Connection to a PBX Areas with 10-digit DialingPage Maintenance Trouble ShootingSympton Possible Solutions Accessories LOG Tables Name Phone Number Directory Code Entry Alternate Area Code Name Phone Number Directory Code Entry Alternate Area Code Resident Instruction Sheet