Aiphone IS-SOFT operation manual Switching Zoom/Wide, Pan & Tilt, Wide Zoom, Left Right Down

Page 15

Viewing video images at a video door station

You can view video images at the target station when receiving a call from or communicating with a video door station, or monitoring a video door station in your site. The video images can be adjusted as necessary by using the following functions on the PC master station.

■Switching Zoom/Wide

The display mode on the monitor can be switched between zoom and wide by each click of .

[ZOOM/WIDE]

Wide

Zoom

NOTES:

•The preset position of zoom image is set in the System setting on a PC.

•When the display mode switches from wide to zoom, the zoom image from the preset position is displayed.

•Depending on the properties of the video door station camera, the wide image may appear more distorted than the zoom image but this is not a malfunction.

•In the zoom mode, the image can be moved from right to left or up and down.

■ Pan & Tilt

When a zoom image is displayed, clicking	moves the
image as shown below.

Up

Left Right

Down

NOTES:

•The image range of the zoom mode and wide mode differs. The edge of wide image will not be displayed with the zoom mode.

•At night, the object image may be blurred and less-visible when moving the image from right to left or up and down because illumination to the object is reduced. The same applies to a moving object.

GETTING STARTED USING THE PC MASTER STATIONAPPENDIX

15

Image 15

Contents IS-SOFT Contents Playing recorded image And/or sound Deleting a recorded ﬁle Connecting a headset or handset to the PCIntroduction PrecautionsMain window Part Names and Their FunctionsHow to select items in the list area Icons Status when the icon appearsStatus display icons Dial keys →P Audio transmit level indicatorMinimize button Close buttonStop button →P -31 Start Date selection tab and calendarStation Select tab Prior ﬁle buttonCommunication Outline of OperationsYou cannot monitor or scan-monitor a remote site Door release Call tone rings, and the corresponding display appears Receiving a callCommunication in the hands-free mode Communication in the press-to-talk modeWhen called in from a sub station About the priority Priority Setting ActionLeft Right Down Switching Zoom/WidePan & Tilt Wide ZoomDayNight Adjusting imagesClick When the image is difﬁcult to see To restore the image before adjustmentCommunication transferring Call transferringReceive a call and communicate with it. →P To communicate with the caller While receiving a callPlaced calls →P Basic procedure for selecting the search itemsStandby mode Search itemsChime Zone →P Search ListTo select two or more stations and/or zones from the list Searching for a station, zone or remote site from the listClick to select the target zone so that it is highlighted Start paging by following the procedure for pagingSelect Stations by Type from the Search LIST. →P Select Paging Zone from the Search ListClick to select the target site so that it is highlighted Select Remote Site from the Search ListPage Calling another station direct voice call Click To start calling talkingClick to ﬁnish communicating To shift to scan-monitoring Viewing video images at the target stationMonitoring Scan-monitoringOr pressing the external call button*1 When you have ﬁnished paging, clickClick or when Chime is displayed Or lifting the handsetOFF RecordingHow to perform manual recording Snapshot recording Auto recordingVideo recording Play Playing recorded image and/or soundClick On the Main window Play operation list When play has ﬁnishedTechnical Precautions Available Character List SpecificationsWindows XP Home/Professional SP3 32bit