Aiphone IS-SOFT Viewing video images at the target station, Monitoring, Scan-monitoring

Page 26

Monitoring

You can monitor a sub station or multiple sub stations in your site sequentially (scan-monitoring) with a PC master station.

*When monitoring a video door station, you can view the image at the station and hear the sound. When monitoring an audio door station or room sub station, you can only hear the sound at the station.

■Monitoring

1 Search for and select the sub station in your site you want to monitor (so that it is highlighted) in one of the search methods. (→P. 21-24)

NOTE:

You cannot monitor a (PC) master station and remote site.

2 Click (when "[] MONI" is displayed).

You can hear the sound and if the station has a camera, you can also view the image.

* appears in the area for a status display icon.

3 Click to finish monitoring.

NOTES:

•If the selected station is being used (calling, communicating, being monitored, etc.), you cannot monitor the station.

• If you click while monitoring, the communication mode starts with the station after a tone.

•During video monitoring, you can switch Zoom/Wide, make Pan & Tilt control and adjust images on the monitor. (→P. 15-16)

To shift to scan-monitoring

Click during monitoring.

*If the station being monitored is a preset one for scan- monitoring, the scan-monitoring starts from the subsequent station in the scan-monitoring order.

*If the station being monitored is not a preset one for scan- monitoring, the scan-monitoring starts from the first station in the scan-monitoring order.

■Scan-monitoring

You can monitor the preset stations in your site (up to 20 door stations and/or room sub stations) sequentially, each for the set duration.

*The stations should be preset in the System setting on a PC.

1 Click in the standby mode.

The stations set for scan-monitoring are monitored sequentially, each for the set duration.

2 Click to stop scan-monitoring.

* appears in the area for a status display icon during scan-monitoring.

To monitor only the desired station continuously:

Click when the target station is being monitored during scan-monitoring.

*Click again to restart the scan-monitoring.

NOTES:

•Clicking is invalid during scan-monitoring.

•If the PC master station receives a call during scan-monitoring, the scan-monitoring ends automatically.

•If one of the preset stations is being used (calling, communicating, being monitored, etc.) during the scan-monitoring, it will be skipped.

•During the scan-monitoring, the Zoom/Wide, Pan & Tilt, door release and image adjusting functions are disabled. (The camera is fixed in the Wide mode.)

Viewing video images at the target station

When you are receiving a call from, communicating with a video door station, or monitoring a video door station in your site, you can view video images at the target station.

Use the following functions on the PC master station to control video images as you prefer. (→P. 15-16)

•Switching Zoom/Wide

•Pan & Tilt

•Adjusting images

NOTE:

Video images cannot be controlled during scan-monitoring.

26

Page 25 Page 27
Image 26
Page 25 Page 27
Contents IS-SOFT Contents Connecting a headset or handset to the PC Playing recorded image And/or sound Deleting a recorded filePrecautions IntroductionPart Names and Their Functions Main windowStatus display icons How to select items in the list areaIcons Status when the icon appears Close button Audio transmit level indicatorMinimize button Dial keys →PPrior file button →P -31 Start Date selection tab and calendarStation Select tab Stop buttonOutline of Operations CommunicationYou cannot monitor or scan-monitor a remote site Door release Receiving a call Call tone rings, and the corresponding display appearsWhen called in from a sub station Communication in the hands-free modeCommunication in the press-to-talk mode Priority Setting Action About the priorityWide Zoom Switching Zoom/WidePan & Tilt Left Right DownTo restore the image before adjustment Adjusting imagesClick When the image is difficult to see DayNightReceive a call and communicate with it. →P Communication transferringCall transferring While receiving a call To communicate with the callerSearch items Basic procedure for selecting the search itemsStandby mode Placed calls →PSearch List Chime Zone →PSearching for a station, zone or remote site from the list To select two or more stations and/or zones from the listSelect Paging Zone from the Search List Start paging by following the procedure for pagingSelect Stations by Type from the Search LIST. →P Click to select the target zone so that it is highlightedSelect Remote Site from the Search List Click to select the target site so that it is highlightedPage Click to finish communicating Calling another station direct voice callClick To start calling talking Scan-monitoring Viewing video images at the target stationMonitoring To shift to scan-monitoringOr lifting the handset When you have finished paging, clickClick or when Chime is displayed Or pressing the external call button*1Recording OFFVideo recording How to perform manual recording Snapshot recordingAuto recording Click On the Main window PlayPlaying recorded image and/or sound When play has finished Play operation listWindows XP Home/Professional SP3 32bit Technical Precautions Available Character ListSpecifications
Top Page Image Contents