Aiphone IS-SOFT operation manual Or lifting the handset, Or pressing the external call button*1

Page 27

Paging

The system allows you to page (transmit an announcement) the selected zone(s) and/or station(s) simultaneously.

*For paging a remote site, you can page the zone registered as the target in the site.

NOTE:

If you use zones, register zones in the System setting on a PC in advance.

1 Search for and select the zone or a remote site you want to page (so that it is highlighted) in one of the search methods. (→P. 21-24)

*You can select up to 5 zones and/or stations in your site for paging. (→P. 21)

*For paging a zone in a remote site, you cannot select a zone. If you page (the pilot zone in) a remote site by searching for it from [REMOTE SITE] of SEARCH LIST, select the target site, and then select [PAGING] (so that it is highlighted). (→P. 23)

2 To set the priority (when “[] PRIORITY” is

displayed), click , and then click to select the

target priority (so that it is highlighted).

*If you will not set the priority, skip this step and click

. You can start paging after a tone with “Normal” priority.

3

Click

or

(when “[ ] [ ] PAGE” is

 

displayed).

 

 

 

4

After a tone rings, start paging.

5

A receiver can answer it and communicate with you

 

by clicking

, pressing

TALK

or lifting the handset,

or pressing the external call button*1.

*When the priority is set to "BROADCAST", no receiver can answer the paging.

The paging will be heard in priority to any other performances (of lower priority) including ongoing communications between stations. (→P. 14)

6 When you have finished paging, click .

*1: Connected to a room sub station and the necessary setting should be made in the System setting on a PC. (Be careful not to press the call button on a room sub station by mistake.)

Chime paging

The system allows you to make chime paging (transmit a chime) to all the stations in the designated zone(s) simultaneously.

*For chime paging to a remote site, you can make chime paging to the zone registered as the target in the site, and cannot select a sound source.

NOTE:

If you use zones, register zones in the System setting on a PC in advance.

1 Search for and select the zone you want to make chime paging (so that it is highlighted) in one of the search methods. (→P. 22, 24)

*You can select up to 5 zones for chime paging. (→P. 21)

*If you have selected the target zone (so that it is highlighted) by using a speed dial button, skip to step 4.

*For chime paging to a zone in a remote site, you cannot select a zone. If you make chime paging to (the pilot zone in) a remote site by searching for it from [REMOTE SITE] of SEARCH LIST, select the target site, and then select [CHIME] (so that it is highlighted) (→P. 23) and then skip to step 4.

2

Click

or (when “[ ] [ ] PLAY SOUND” is

 

displayed).

3

Click

to select the sound source of chime from

 

the list (so that it is highlighted).

4 To set the priority (when “[] CHIME [] PRIORITY” is displayed), click , and then click

to select the target priority (so that it is highlighted).

*If you will not set the priority, skip this step and click . Chime paging begins with “Normal” priority.

5 Click or (when “[] [] CHIME” is displayed).

Chime paging begins.

Making chime paging automatically

You can also set chime page automatically in your site on a preset schedule in the System setting on a PC.

GETTING STARTED USING THE PC MASTER STATIONAPPENDIX

27

Page 26 Page 28
Image 27
Page 26 Page 28
Contents IS-SOFT Contents Playing recorded image And/or sound Deleting a recorded file Connecting a headset or handset to the PCIntroduction PrecautionsMain window Part Names and Their FunctionsHow to select items in the list area Icons Status when the icon appearsStatus display icons Dial keys →P Audio transmit level indicatorMinimize button Close buttonStop button →P -31 Start Date selection tab and calendarStation Select tab Prior file buttonCommunication Outline of OperationsYou cannot monitor or scan-monitor a remote site Door release Call tone rings, and the corresponding display appears Receiving a callCommunication in the hands-free mode Communication in the press-to-talk modeWhen called in from a sub station About the priority Priority Setting ActionLeft Right Down Switching Zoom/WidePan & Tilt Wide ZoomDayNight Adjusting imagesClick When the image is difficult to see To restore the image before adjustmentCommunication transferring Call transferringReceive a call and communicate with it. →P To communicate with the caller While receiving a callPlaced calls →P Basic procedure for selecting the search itemsStandby mode Search itemsChime Zone →P Search ListTo select two or more stations and/or zones from the list Searching for a station, zone or remote site from the listClick to select the target zone so that it is highlighted Start paging by following the procedure for pagingSelect Stations by Type from the Search LIST. →P Select Paging Zone from the Search ListClick to select the target site so that it is highlighted Select Remote Site from the Search ListPage Calling another station direct voice call Click To start calling talkingClick to finish communicating To shift to scan-monitoring Viewing video images at the target stationMonitoring Scan-monitoringOr pressing the external call button*1 When you have finished paging, clickClick or when Chime is displayed Or lifting the handsetOFF RecordingHow to perform manual recording Snapshot recording Auto recordingVideo recording Play Playing recorded image and/or soundClick On the Main window Play operation list When play has finishedTechnical Precautions Available Character List SpecificationsWindows XP Home/Professional SP3 32bit
Top Page Image Contents